Unsolved
This post is more than 5 years old
207 Posts
0
663
add disk to dmx4
We have purchased 36 new disk for our dmx4 that is connecte to our IBM mainframe and windows/AIX environments. The new disk will be used for new IBM mainframe systems. I will work with EMC RTS/CE to create a new disk group and add 26 disks to that group. We will create 86 mod 27's and 125 mod 9's.
This will leave me 10 disk out of the 36. I have used SMC and symcli to create devices, form metas, map/mask devices etc. I have never done anything on the back end related to disk drives. Is it possible for me to use SMC to create a new disk group and add the 10 disks? It's also possible that I may want to add some disk to an existing disk group. Can I do that with SMC?
This will leave me 10 disk out of the 36. I have used SMC and symcli to create devices, form metas, map/mask devices etc. I have never done anything on the back end related to disk drives. Is it possible for me to use SMC to create a new disk group and add the 10 disks? It's also possible that I may want to add some disk to an existing disk group. Can I do that with SMC?
xe2sdc
2 Intern
2 Intern
•
2.8K Posts
0
August 10th, 2009 12:00
http://forums.emc.com/forums/thread.jspa?threadID=130002&tstart=0
It looks like the other thread (in Symmetrix area) is active while other xpost are quiet.
Locking with referring URL to SYMM forum.
Message was edited by:
Dave Yates
Davidy8s
154 Posts
0
August 10th, 2009 12:00
I'll leave up the cross posted (in Solutions Enabler forum) one so your topic gets a broader audience.
Dave Yates
EMC TSE3
Benevolent Host S/W & Mainframe Forum Moderator
"Il Moderatore Benevolo"