Unsolved
5 Posts
0
1559
SNMP Traps for PowerVault NX3610
As per the documents I picked up the MIBs from the FluidFS web gui but it is still not translating the OIDs that are being sent via the traps. The files I have are FluidFS-MIB.txt and FluidFS-Traps-MIB.txt, example OIDs being half translated are:
SNMPv2-SMI::enterprises.8010.21
SNMPv2-SMI::enterprises.8010.21.2.66
SNMPv2-SMI::enterprises.8010.21.2.65
Can anyone steer me in the right direction, I suppose the MIBs I have used do not have the necessary info to translate the oid's.
Thanks!
gwaters
12 Posts
0
July 2nd, 2020 12:00
@Zanz76,
Sorry for the delayed response. From what I have been able to uncover about this, in the older versions of FluidFS, Previous to version 4, the OID in the MIBs is 8010 which is a legacy FluidFS OID. The Dell OID is 674. This is addressed in version 4.x of the FluidFS firmware, but of course the NX3610 doesn't support V4.x.
However, there is a possible work around.
In you downloaded MIBs you may modify the line defining the dell OBJECT IDENTIFIER, which will show as 674, and change it to 8010.
dell OBJECT IDENTIFIER ::= { enterprises 674 }
I hope this helps.