Unsolved
This post is more than 5 years old
3 Posts
0
1143
Dell PowerVault MD3220i
Initiator always give me connection fail
I am using two of my NIC card port connected to the ISCSI port on the controller
can you tell me what is the IP target address that I have to use on the ISCSI initiator app
the IP of the management port or the IP of the ISCSI port
neither of both work
can some one help with this, how I test the connectivity
DELL-Sam L
Moderator
Moderator
•
7K Posts
0
April 22nd, 2017 15:00
Hello mrodr180,
Did you setup your MD3220i as we have laid out in the Deployment Guide. If you haven’t then here is a link to the deployment guide. http://downloads.dell.com/manuals/common/powervault-md3200i_deployment%20guide_en-us.pdf
Please let us know if you have any other questions.