Unsolved
This post is more than 5 years old
17 Posts
0
65357
The computer will not go to sleep
The computer will not go to sleep
Power management although selected to suspend the desktop, this is never executed. The monitor is off, but not the desktop.
Just forcing their way into the suspension, is that this is assumed.
Already have disabled the network card to "wake up" as well as the usb 3.0 hub.
Some help, please!
My Dell
Computer: DELL XPS 8300CPU: Intel Core i5-2310 (Sandy Bridge-DT, D2)
2900 MHz (29.00x100.0) @ 2993 MHz (30.00x99.8)
Motherboard: DELL 0Y2MRG
Chipset: Intel H67 (Cougar Point) [B3]
Memory: 6144 MBytes @ 665 MHz, 9.0-9-9-24
- 1024 MB PC10600 DDR3 SDRAM - Samsung M378B2873FH0-CH9
- 2048 MB PC10600 DDR3 SDRAM - Samsung M378B5773DH0-CH9
- 1024 MB PC10600 DDR3 SDRAM - Samsung M378B2873FH0-CH9
- 2048 MB PC10600 DDR3 SDRAM - Samsung M378B5773DH0-CH9
Graphics: AMD Radeon HD 6870 1GB GDDR5
ATI/AMD Radeon HD 6870 (BARTS XT), 1024 MB GDDR5 SDRAM
Drive: ST31500341AS, 1465.1 GB, Serial ATA 3Gb/s
Drive: TSSTcorp DVD+/-RW TS-H653H, DVD+R DL
Drive: HL-DT-ST BDDVDRW GGC-H20L, BD-ROM
Drive: TSSTcorp DVD+-RW TS-H653H, DVD+R DL
Sound: Intel Cougar Point PCH - High Definition Audio Controller [B3]
Sound: ATI/AMD Barts - High Definition Audio Controller
Network: Broadcom BCM57788 NetLink PCI-E Network Adapter
OS: Microsoft Windows 7 Home Premium (x64) Build 7601
DELL-Rajath N
4 Operator
4 Operator
•
1.8K Posts
0
September 11th, 2012 08:00
Hi jjomorgado,
I suggest you update the video card drivers to it’s latest version from the following link and by selecting the appropriate driver from the Video section:
http://dell.to/AidgTv
Some devices may be active in the background that may prevent the computer from going to Sleep mode. To check and to disable the devices, please follow the steps provided below:
1. Click on “Start”, type “CMD”.
2. Right-click on “CMD and” choose” Run as administrator.”
3. Type the following command to list out all the devices that can wake up your Windows 7 computer:
“Powercfg -devicequery wake_armed”
4. You can disable a device by typing in the following command and replacing “devicename” with the name of the device listed previously:
Powercfg -devicedisablewake “devicename“
You can now check if the computer goes to “Sleep” mode.
Please reply to this message with your findings.
jjomorgado
17 Posts
0
September 11th, 2012 13:00
The single device is the mouse
and as the mouse button is on / off, on off left to try
jjomorgado
17 Posts
0
September 11th, 2012 14:00
It did not work. Only suspended after forcing the same.
DELL-Rajath N
4 Operator
4 Operator
•
1.8K Posts
0
September 12th, 2012 13:00
Hi jjomorgado,,
Thank you for replying to the message. Please remove the mouse and select the Sleep option to check if is works. Please reply with your findings.
jjomorgado
17 Posts
0
September 13th, 2012 08:00
I can not run the command correctly
DELL-Rajath N
4 Operator
4 Operator
•
1.8K Posts
0
September 14th, 2012 11:00
Hi jjomorgado,,
Please set a time for the sleep function in the "Power Options" first. The when you select the sleep option and the monitor turns off, remove the mouse and check if the Desktop goes to sleep. Please reply with your findings.
jjomorgado
17 Posts
0
September 14th, 2012 13:00
Do not sleep
DELL-Rajath N
4 Operator
4 Operator
•
1.8K Posts
0
September 17th, 2012 14:00
Hi jjomorgado,
Thank you for replying and I apologize for the inconvenience caused. Request you to private message me your system service tag number. To private message accept my friend request, click on my user name to send a message.
jjomorgado
17 Posts
0
September 23rd, 2012 07:00
Please, any help?
DELL-Roshan L
4 Operator
4 Operator
•
4.4K Posts
0
May 29th, 2013 23:00
This thread has been locked due to inactivity. For assistance, with same issue or a different issue, please click New Post on the top right to start a New Thread.