This post is more than 5 years old
53 Posts
0
2249
MDS Upgrade 9506 5.0.4d > 5.2.2d
Hi ALL,
I need some information regarding Firmware upgrade MDS-9506, I little bit confusion in it. Should I copied the firmware bootflash and slot 0 and what is slot 0.
Regards
Awais
healyj
141 Posts
0
December 12th, 2017 07:00
Hi there,
In our efforts to clean up the forum, we came across your question / statement.
If the question / statement is still valid, not expired and you need an update please reach out again and we try to get it answered.
As for now we will set it to “answered.”
Regards,
Jim
MAwais
53 Posts
0
November 2nd, 2012 01:00
Hi Vipin,
Thanks for your reply,
first I copy the system and kikstart files on bootflash and then copy the slot 0. also let me know install all command only run with bootflash.
Regards,
Awais
Vipin VK
812 Posts
0
November 2nd, 2012 01:00
Your supervisor will have a slot for external compact flash drives. Try dir slot0 command to see if you have one installed in.
Vipin VK
812 Posts
0
November 2nd, 2012 02:00
Hope this helps you.,
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_2/upgrade/guides/nx-os/upgrade.html#wp332407
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 2nd, 2012 03:00
you don't have enough space in bootflash ?
MAwais
53 Posts
0
November 2nd, 2012 07:00
Hi,
I have space in bootflash but I want to know about slot 0. what is the difference between bootflash or slot 0.
Regards,
Awais
Vipin VK
812 Posts
0
November 2nd, 2012 09:00
Bootflash is the internal flash memory and slot0 is an option to have external flash devices. I hope this clarifies it for you.
MAwais
53 Posts
0
November 4th, 2012 22:00
Hi,
Thanks for your reply, Only below command is required for upgrade the active and standby supervisor?
install all system bootflash:m9500-sf2ek9-mz.5.2.2d.bin kickstart bootflash:m9500-sf2ek9-kickstart-mz.5.2.2d.bin
Regards,
Awais
Vipin VK
812 Posts
0
November 5th, 2012 00:00
yes, and is clearly mentioned in the above procedure.