3 Posts
0
384
SC8000 - re-using disks as replacements in another SC8000
Hi
I have two compellents, both SC8000 ctrl's and both the same SCOS level. One of them is being decomissioned.
Question - can I use drives from the decomissioned one as replacements for failed drives in the other.
If if put in as a 'swap' for a failed drive do they reformat etc (i.e. ignore what already on them from their previous life)
Any help much appreciated.
DiegoLopez
4 Operator
4 Operator
•
2.7K Posts
0
April 21st, 2022 08:00
Hello @BFCRich,
Yes, as long as the disks are compellent firmware compatible and with the same characteristics they should work. However I suggest you before decommision on the old one to remove all volumes and then reformat your SC8000 back to factory.
Regards.
BFCRich
3 Posts
0
April 25th, 2022 02:00
Thanks for the advice Diego.
Much appreciated
Rich