Unsolved
This post is more than 5 years old
2 Posts
0
2066
Dell/EMC CX300 SAN reports 901 Hard SCSI Bus error on Vault 0
Hi,
I have a CX300 SAN I am trying to keep running for a while longer.
Recently, drive 0 (the first vault drive) reported a 901 Hard SCSI Bus error and has an orange light. I have plenty of spares of that drive type so I inserted one. The drive light was green and blinked for about a minute and then went orange as well. Same error. Tried a third drive, same thing.
So I am suspecting that the issue is with the fibre channel connector on the unit, which sounds like a major problem. However, maybe there is something I am overlooking or could try that has worked for others in the past to revive that bus?
Here is the full message I receive via email:
Time Stamp 07/06/17 15:24:51 (GMT) Event Number 901
Severity Error Host CX300-SPB
Storage Array APM000*******4 SPB Device Enclosure 0 Disk 0
Description Hard SCSI Bus Error
Thanks for any ideas!
SA.
kelleg
4.5K Posts
0
July 7th, 2017 10:00
The 901 Hard SCSI BUS Error can be caused by a number of issues other than a bad drive. It could be the FC interface between the Storage Processor and the drive.
In the Event Log, you should see the complete error message - the secondary numbers in that message can provide clues to where the issue is. Copy/Paste the whole error here.
glen