Unsolved
This post is more than 5 years old
2 Posts
0
1015
CX4-120 Error
i have cx4-120 i can't access , when i connected via serial port i found this error:
ErrorCode: 0x00000167
ErrorDesc:
FRU: I/O Module 0
Device: Mod0 LCC Port 0
Description: Disk enclosure is not cabled to LCC primary port
Rev: 08.70
READ command
check_lcc_cabling()
EndError:
ErrorTime: 02/09/2017 07:02:06
how to solve this problem .
rewalmilo
62 Posts
0
February 9th, 2017 00:00
Either you have a miss cabled backend or a bad component like a LCC or SP I/O Module.
First check your backend cabling. Look at the lcc cards the two ports are looking similar but on is explicit the in and one the out port.
Regards
said elnajjar
2 Posts
0
February 9th, 2017 00:00
thank you rewalmilo for fast reply ,,i checked all cable are connected well.
kelleg
4.5K Posts
0
March 29th, 2017 13:00
If the cables are all correct (try re-seating the cables with the power off), it may be a bad LCC. You'll need to contact EMC support for further help.
glen