This post is more than 5 years old
2 Posts
0
1073
Clariion AX4-5 SNMP trap list
I'm trying to get hold of an SNMP Trap List (OID list with event alert name) for AX4-5. I'm running EMC Navisphere Express Version 6.23.8.1.2 (if that influences it in any way). I have the MIB already, but that's not got a lot of detail in it!
Can anybody help? Searching the EMC support pages has got me nowhere (probably down to my search skills)
Thanks!
kelleg
4.5K Posts
1
October 21st, 2015 09:00
Please see the following KB article:
https://support.emc.com/kb/88179
glen
rp1231
2 Posts
0
October 22nd, 2015 03:00
Thanks Glen
For anyone following on, here's the text from the KB article:
Issue
User only received two SNMP traps, 0x2500, and 0x2580. When system is faulted, the user does not receive new traps if a new error or fault appears in the storage array.
Environment EMC SW: Navisphere
EMC SW: Navisphere Express
Product: CLARiiON AX Series
Product: CLARiiON AX4-5
Resolution
During every poll, Navisphere will check the subsystems state for faulted or not faulted:
1. If in the last poll the system was not faulted, and the system is faulted in this poll, then it will generate a 0x2580 event to notify the user that the array is faulted.
2. If in the last poll the system was faulted, and it is not faulted in this poll, then it will generate a 0x2500 event to notify the user that the array is not faulted.
3. If the states are the same in last poll and this poll, no events will be generated.
Navisphere Express does not support configure events.
If the user wants to use SNMP to monitor other events, they will need to install Navisphere Manager Enabler.