Unsolved
This post is more than 5 years old
3 Posts
0
1543
Access to CX4-120
We have buy used CX4-120 and now I wanna connect to them.
I read a lot stuff here and on other site, but can't access to CX4-120.
I don't have Micro DB9 cable to connect on service port.
And I found that I connect on Service LAN port.
So I install WinXP, and setup IP for this PC:
IP: 128.221.1.249
Subnet: 255.255.255.248
Gateway: blank
DNS: blank
I took LAN cable and connect to Service LAN port and in IE I try:
http://128.221.1.250/setup (and I try http://128.221.1.251) but nothing happend.
Could please somebody help me to connect on CX4-120
TimH
100 Posts
0
July 24th, 2015 09:00
Try creating a PPP Connection again,by following step by step instruction from here: https://community.emc.com/docs/DOC-8449
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 24th, 2015 09:00
Have you gone to the CX4 Support page on https://support.emc.com? There is a link under planning to Generate Customized CX4 Support Documentation that should help you.
kole1108
3 Posts
0
July 26th, 2015 22:00
Thank you, I will try.
kole1108
3 Posts
0
July 26th, 2015 22:00
I can't do that cause I don't have DB9 -> Micro DB9 cable
kelleg
4.5K Posts
1
July 27th, 2015 09:00
The serial cable for the CX4 is a micro DB9 (array side male) to DB9 (PC side is a female) is a null modem cable. Array is female socket and PC is usually a male connector. Should be available on-line. The EMC part number is 038-003-084.
glen