Unsolved
This post is more than 5 years old
23 Posts
0
2495
How to login to Control Station
Hello ,
We have a Celera NS-120 and it is end of support now.
We are using it as a temporary file server.Unfortunately we are not able to login to the Celera Management and the management IP also not pinging.We could able to accees all the shrares from it.
What is the alternative to check the status of the storage ?
Regards,
Muhammed Basheer
Rainer_EMC
8.6K Posts
0
November 23rd, 2015 05:00
Ssh into the control station
If that doesnt work attach a serial cable
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
November 23rd, 2015 05:00
Without a control station you will not be able to do much. Have you tried to connect to the control station with a serial cable and see what's going on with it ?
Rainer_EMC
8.6K Posts
0
November 23rd, 2015 07:00
Or press the reset button on the control station
mohdbAsheer
23 Posts
0
November 24th, 2015 04:00
I will check and update
mohdbAsheer
23 Posts
0
November 28th, 2015 23:00
Dear Rainer,
The control station is not booting up and and it is stuck ,so that was the reason for this.
Can you please help me to make the control station up ,what is the procedure for that ?
Thanks in advance.
Regards,
Muhammed Basheer MP
mohdbAsheer
23 Posts
0
November 28th, 2015 23:00
Dear dynamox,
The control station is not booting up and and it is stuck ,so that was the reason for this.
Can you please help me to make the control station up ,what is the procedure for that ?
Thanks in advance.
Regards,
Muhammed Basheer MP
Rainer_EMC
8.6K Posts
0
November 30th, 2015 06:00
there is a serial port on the control station and the NS-120 ships with a matching serial cable.
Attach a serial Terminal (laptop with Terminal software will do) to find out where it is stuck in the boot