Unsolved
This post is more than 5 years old
4 Posts
0
14675
SAN Storage slow transfer file
I'm using Blade server M600, chassis m1000e, I was craete new storage at SAN storage FC CX3-40 , after i format partition it was pass, and i was create 1 folder size 177GB . After that i copy that folder at same place.The process very slow and take more 6 hours, should i configure agent.config at nevisphere first? or should i make zoning at SAN switch? anybody can help me.........pls
virtualTodd
112 Posts
0
November 4th, 2008 07:00
You should Zone your fibre switch and configure the agent.config on the local navi agent. Another key thing to do is to check the compatability list on the emc powerlink site to find out what the correct driver is for your HBA that you are using. Then download and install the correct driver version.
It is possible that the LUN was still initializing in the background when you did the copy? Is it still slow now?
Additionally - what RAID type and number of disks?
Thanks,
Todd
amieer
4 Posts
0
November 4th, 2008 20:00
virtualTodd
112 Posts
0
November 5th, 2008 09:00
Thanks,
Todd
amieer
4 Posts
0
November 5th, 2008 17:00
virtualTodd
112 Posts
0
November 6th, 2008 08:00
There is also the 10g Blades Cookbook here on DellTechCenter that has a condesed version of how to setup the Brocade 4424 - http://www.delltechcenter.com/page/10G+Blades+Cookbook
Thanks,
Todd