Blades
Posts
Unsolved
This post is more than 5 years old
1 Message
0
15694
October 27th, 2010 20:00
mezzanine card speed
What is the speed of the mezzanine card slots. I have seen PCIe x4 and x8 on other blades,
Responses(1)
No Events found!
Unsolved
This post is more than 5 years old
1 Message
0
15694
Top
Kong Yang
180 Posts
0
November 3rd, 2010 19:00
From Dell Blades doc at http://support.dell.com/support/edocs/systems/pem/en/hom/html/blades.htm#wp1453839
Full Height Blades:
* The M610x supports two small-form factor (SFF) mezzanine cards. x8 PCIe Gen 1 and x8 PCIe Gen 2 cards are supported.
* M910 supports SFF mezzanine cards in all four slots. x8 PCIe Gen 1 and x8 PCIe Gen 2 cards are supported.
* The M710 supports SFF and LFF mezzanine cards in all four slots. x8 PCIe Gen 1 and x4 PCIe Gen 2 cards are supported.
* The M905 and M805 blades support LFF x8 PCIe Gen 1 mezzanine cards in all four slots.
Half-Height blades:
# The M710HD supports SFF and LFF mezzanine cards. x8 PCIe Gen 1 and x4 PCIe Gen 2 cards are supported.
# The M610 supports two SFF or one SFF card and one LFF mezzanine card. x8 PCIe Gen 1 and x4 PCIe Gen 2 cards are supported.
# The M605 and M600 blades support two LFF x8 PCIe Gen 1 mezzanine cards.