Unsolved
This post is more than 5 years old
2 Posts
0
2073
FN410T
Im currently configuring FN410Tx2 connected to Chassis fx2 and with 6 x FC430
Chassis Management IP is 10.67.194.X
Then I configured the Blade I/O Manager with same subnet 10.67.194.X
FN410T is configured as default
the 6 x FC430 is also configured same subnet 10.67.194.X
the problem is when I connect the a Connect to any external port 9 , 10, 11 and 12
I/O Manager becomes disconnected. but the Server (6xFC430) is still connected.
Please help me
Thanks
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
May 17th, 2018 11:00
Hello
I suggest reviewing the manuals in regard to default configurations and setup instructions. You can find manuals for the hardware listed under the FX2 chassis support page.
http://www.dell.com/support/
If a network link is functional and becomes non-functional when another link is established then it is most likely due to some type of frame/packet control or security feature. This is typically caused by improper setup and configuration. I suggest that you review your configuration for issues.
Thanks
Arn7
2 Posts
0
May 20th, 2018 04:00
in the machine, there is description / related topic regarding on my issue.
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
May 23rd, 2018 09:00
If you have additional information relevant to the issue then I suggest posting it into the forum so that the community can better assist you.
Thanks