Unsolved
This post is more than 5 years old
5 Posts
0
10160
Configuration Switch M8024-K, Server M710HD and Red Hat 5.6
Hello
I have to configure a Red Hat 5.6 and NPAR is enabled in the NIC Broadcom 57712, Red Hat recognizes the 4 interfaces from eth0 to eth1 and I configure the Switch M8024-K with 4 Vlan. In the Switch M8024-K the interfaces of the Blade is the TenGiga 1/0/1 and was assigned in mode general to the 4 Vlan. Now in Red Hat I need assign 1 Vlan each NIC. Example
eth0 ---> Vlan 10
eth1 ---> Vlan 20
eth2 ---> Vlan 30
eth3 ----> Vlan 40
Also I configured the Switch M8024-K with Bind MAC to Vlan
vlan association mac 0010.1897.DD30 10
vlan association mac 0010.1897.DD32 20
vlan association mac 0010.1897.DD34 30
vlan association mac 0010.1897.DD36 40
In the Operating System I configure the NIC. Example
ifcfg-eth0
DEVICE=eth0
IPADDR=172.10.10.10
NETMASK=255.255.255.0
GATEWAY=172.10.10.1
HWADDR=00:10:18:97:DD:30
ifcfg-eth1
DEVICE=eth1
IPADDR=172.20.20.10
NETMASK=255.255.255.0
GATEWAY=172.20.20.1
HWADDR=00:10:18:97:DD:32
The problem is the following
When I run a ping to gateway 172.10.10.1 no exist problem, but when I run a ping to Gateway 172.20.20.1 I received the message
Reply from 172.20.20.1 Destination host unreachable
I need to know if is neccesary configure the tag of Vlan in the eth1 assign the Vlan
Example
DEVICE=eth1.20
IPADDR=172.20.20.10
NETMASK=255.255.255.0
GATEWAY=172.20.20.1
HWADDR=00:10:18:97:DD:32
VLAN=yes
I will appreciate your help since I need to configure eth1 to eth3 without Vlan tag.
Thanks for your help
I have to configure a Red Hat 5.6 and NPAR is enabled in the NIC Broadcom 57712, Red Hat recognizes the 4 interfaces from eth0 to eth1 and I configure the Switch M8024-K with 4 Vlan. In the Switch M8024-K the interfaces of the Blade is the TenGiga 1/0/1 and was assigned in mode general to the 4 Vlan. Now in Red Hat I need assign 1 Vlan each NIC. Example
eth0 ---> Vlan 10
eth1 ---> Vlan 20
eth2 ---> Vlan 30
eth3 ----> Vlan 40
Also I configured the Switch M8024-K with Bind MAC to Vlan
vlan association mac 0010.1897.DD30 10
vlan association mac 0010.1897.DD32 20
vlan association mac 0010.1897.DD34 30
vlan association mac 0010.1897.DD36 40
In the Operating System I configure the NIC. Example
ifcfg-eth0
DEVICE=eth0
IPADDR=172.10.10.10
NETMASK=255.255.255.0
GATEWAY=172.10.10.1
HWADDR=00:10:18:97:DD:30
ifcfg-eth1
DEVICE=eth1
IPADDR=172.20.20.10
NETMASK=255.255.255.0
GATEWAY=172.20.20.1
HWADDR=00:10:18:97:DD:32
The problem is the following
When I run a ping to gateway 172.10.10.1 no exist problem, but when I run a ping to Gateway 172.20.20.1 I received the message
Reply from 172.20.20.1 Destination host unreachable
I need to know if is neccesary configure the tag of Vlan in the eth1 assign the Vlan
Example
DEVICE=eth1.20
IPADDR=172.20.20.10
NETMASK=255.255.255.0
GATEWAY=172.20.20.1
HWADDR=00:10:18:97:DD:32
VLAN=yes
I will appreciate your help since I need to configure eth1 to eth3 without Vlan tag.
Thanks for your help