跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

ME5: How to locate the PowerVault enclosure service tag

摘要: The enclosure service tag is a seven-digit alphanumeric number. It is found using the PowerVault Manager, command-line interface (CLI), or on an information tag at the front of the enclosure. This information is used to route support calls to appropriate personnel when contacting Dell EMC technical support. ...

本文章適用於   本文章不適用於 
查看關於以下產品的資源

說明

On the enclosure
The Service Tag and Express Service Code are found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the back of the storage system chassis. 

Using PowerVault Manager 
The About panel (Maintenance > About) shows information about the system, its hardware, and its storage configuration.

The Service Tag is the seven-digit alphanumeric number that is written after the enclosure <number>:

image.png


Using the Command Line Interface (CLI)
The Service Tag is the seven-digit alphanumeric number that is shown in the output of either of the following commands:

  • show service-tag-info
  • show enclosures
Open an SSH session to either controllers' management IP address. 
# show service-tag-info

Encl Service Tag
--------------------------------------
0    ABCD123
--------------------------------------
Success: Command completed successfully. (2022-01-21 04:16:23)

受影響的產品

PowerVault ME5012, PowerVault ME5024, PowerVault ME5084
文章屬性
文章編號: 000196714
文章類型: How To
上次修改時間: 12 8月 2022
版本:  2
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。