跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

文章編號: 000123806

How to Configure Updates in Dell Threat Defense

摘要: Updates can be configured in Dell Threat Defense by following these instructions.

本文可能採用自動翻譯。如果您對翻譯品質有任何寶貴意見，請使用此頁面底部的表單告訴我們，謝謝。

文章內容

症狀

Note:

This article covers how to configure updates in Dell Threat Defense.

Affected Products:

Dell Threat Defense

原因

Not applicable.

解析度

The base configuration for the Dell Threat Defense console automatically updates devices to the latest version. A Threat Defense Administrator can optionally deploy builds to test and pilot zones before production.

  1. From a web browser, go to the Dell Threat Defense administration console at:
  2. Log in to the Dell Threat Defense administration console.

Dell Threat Defense administration console

  1. In the console, click the Settings tab.

Settings

  1. Under Settings, click Agent Update.

Agent Update

  1. The Production zone is set to Auto-Update by default. It can be changed to a specific agent version or set to Do Not Update. By default, Test & Pilot zones cannot be configured if Production is set for Auto-Update. To enable the option for Test & Pilot zones, change Auto-Update to a specific version or Do Not Update.

Production zone settings

 

SLN310045_en_US__8ddpkm1357e

 
Note: The builds may differ from the pictured example.
  1. Select at least one Test zone and build version from the drop-down lists.

Test zone

Note:
  • A zone must be created before setting up a Test or Pilot group. Reference the Add Zone portion of How to Manage Zones in Dell Threat Defense for more information.
  • The zones and builds may differ from the pictured example.
  1. Select at least one Pilot zone and build version from the drop-down lists.

Pilot zone

Note:
  • A Test zone and Pilot zone are independent of each other. You can either create one, both, or none of them.
  • The zones and builds may differ from the pictured example.
  1. Once updates are configured, click Apply.
Note: Devices will check for updates over update.cylance.com on port 443. If an update is available, the build will be downloaded over download.cylance.com on port 443.

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

文章屬性

受影響的產品

Dell Threat Defense

上次發佈日期

20 12月 2022

版本

8

文章類型

Solution

返回頁首