OptiPlex 3060, 5060, and 7060: Computer Does Not Upgrade or Downgrade BIOS Without a Monitor Connected

摘要: The following article provides information about why the Basic Input-Output System (BIOS) does not upgrade or downgrade without a monitor connected. This has been reported on the OptiPlex 3060, 5060, and 7060 families of Dell Desktop. ...

本文可能已自动翻译。如果您对其质量有任何反馈，请使用此页面底部的表单告知我们。

文章内容

症状

Unable to downgrade or update your BIOS without a monitor attached to your desktop?

Owners of OptiPlex 3060, 5060, and 7060 desktops may experience an issue when upgrading the BIOS without a monitor connected to your computer. If you do not have the monitor connected to the device, the FLASH does not start and the desktop reboots to its operating system.

This also occurs if you are trying to downgrade the BIOS for any reason.

原因

The computer is expected to do this on every attempt, where the Legacy Option Read Only Modules (ROM) are not enabled in the BIOS.

解决方案

Dell added this functionality into BIOS update version 1.7.1 which was released July 17, 2020.

Using the no monitor install with BIOS 1.7.1 installed:

This requires the use of the /novideo switch when updating the BIOS past 1.7.1:

The command can be used in either:
- Command Line (That is Command Prompt or PowerShell.)
- Added while running the update file in the Windows Operating System

Command-Line Example: OptiPlex_7060_1.16.0.exe /s /r /novideo
- OptiPlex_7060_1.16.0.exe /s /r /novideo

Note: While this functionality was added with version 1.7.1, you must attach a screen to update the computer to revision 1.7.1. You have to wait to install the next BIOS update before you can use this feature.

文章属性

受影响的产品

OptiPlex 3060 Tower, OptiPlex 3060 Micro, OptiPlex 3060 Small Form Factor, OptiPlex 5060 Tower, OptiPlex 5060 Micro, OptiPlex 5060 Small Form Factor, OptiPlex 7060 Tower, OptiPlex 7060 Micro, OptiPlex 7060 Small Form Factor

上次发布日期

06 7月 2023

版本

文章类型

Solution

返回页首

欢迎

欢迎访问戴尔