OptiPlex 3050 Support for PCIe M.2 SSD Hard Drives
摘要: This article provides information about the OptiPlex 3050 support for M.2 SSD PCIe hard drives.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
The M.2 slot on the OptiPlex 3050 supports only PCIe M.2 SSD hard drives. This article provides additional information about this issue to ensure that the correct M.2 SSD hard drive is installed.
原因
No cause information
解决方案
The drive must use the PCIe bus instead of SATA when installing an M.2 SSD hard drive in the OptiPlex 3050. The following image (Figure 1) provides a visual reference for the two formats:
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
其他信息
Recommended Articles
Here are some recommended articles related to this topic that might be of interest to you.
受影响的产品
OptiPlex 3050 Tower, OptiPlex 3050 Micro, OptiPlex 3050 Small Form Factor文章属性
文章编号: 000129720
文章类型: Solution
上次修改时间: 27 7月 2024
版本: 9
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。