Gå vidare till huvudinnehållet
  • Lägg beställningar snabbt och enkelt
  • Visa beställningar och kontrollera leveransstatus
  • Skapa och kom åt en lista över dina produkter
  • Hantera dina webbplatser, produkter och kontakter på produktnivå från Dell EMC med hjälp av företagsadministration.

ME5: How to locate the PowerVault enclosure service tag

Sammanfattning: The enclosure service tag is a seven-digit alphanumeric number. It is found using the PowerVault Manager, command-line interface (CLI), or on an information tag at the front of the enclosure. This information is used to route support calls to appropriate personnel when contacting Dell EMC technical support. ...

Den här artikeln kan ha översatts automatiskt. Om du har feedback angående kvaliteten kan du meddela oss via formuläret längst ned på den här sidan.

Artikelns innehåll


Instruktioner

On the enclosure
The Service Tag and Express Service Code are found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the back of the storage system chassis. 

Using PowerVault Manager 
The About panel (Maintenance > About) shows information about the system, its hardware, and its storage configuration.

The Service Tag is the seven-digit alphanumeric number that is written after the enclosure <number>:

image.png


Using the Command Line Interface (CLI)
The Service Tag is the seven-digit alphanumeric number that is shown in the output of either of the following commands:

  • show service-tag-info
  • show enclosures
Open an SSH session to either controllers' management IP address.
# show service-tag-info

Encl Service Tag
--------------------------------------
0    ABCD123
--------------------------------------
Success: Command completed successfully. (2022-01-21 04:16:23)

Artikelegenskaper


Berörd produkt

PowerVault ME5012, PowerVault ME5024, PowerVault ME5084

Senaste publiceringsdatum

12 aug. 2022

Version

2

Artikeltyp

How To