Hopp til hovedinnhold
Logg ut

Velkommen til Dell

Min konto
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
Logg på Opprett en konto Premier-pålogging Pålogging for partnerprogrammet
Kontakt oss

Dine Dell.com-handlevogner

Alienware 720M Tri-Mode Wireless Gaming Mouse (AW720M) Usage and Troubleshooting Guide

Sammendrag: The following article provides information about the Alienware 720M Tri-Mode Wireless Gaming Mouse. You can reference each section to learn more about the features of the AW720M Tri-Mode Wireless Gaming Mouse and how to use it. ...

Denne artikkelen gjelder for Denne artikkelen gjelder ikke for Denne artikkelen er ikke knyttet til noe bestemt produkt. Det er ikke produktversjonene som identifiseres i denne artikkelen.
Ta en titt på andre ressurser

Instruksjoner

Table of Contents:

  1. What's in the Alienware 720M Tri-Mode Wireless Gaming Mouse box
  2. Mouse Features
  3. Setting up your Alienware 720M Tri-Mode Wireless Gaming Mouse
  4. Installing the Alienware Command Center (AWCC) and Alienware Gaming Peripheral Driver
  5. Troubleshooting
  6. Additional Information
 

Alienware 720M Wired Gaming Mouse
Figure 1: Work faster and smarter with the Alienware 720M Tri-Mode Wireless Gaming Mouse

 

What's in the Alienware 720M Tri-Mode Wireless Gaming Mouse box

 

Dell AW720M Contents

Figure 2: Alienware 720M Tri-Mode Wireless Gaming Mouse Box Contents

1 Alienware 720M Tri-Mode Wireless Gaming Mouse 2 USB charging cable
3 Clip 4 USB wireless dongle
5 Dongle extender 6 USB-C magnetic dongle for charging
7 Documents
 


Back to Top

 

Alienware 720M Tri-Mode Wireless Gaming Mouse Features

Dell AW720M features
Figure 3: Alienware 720M Tri-Mode Wireless Gaming Mouse top, bottom, and side views

1 Left button 2 Scroll wheel
3 Right button 4 Mode button
5 DPI adjustment button 6 DPI indicator
7 Power button 8 USB-C port
9 Forward button 10 Backward button
 


Back to Top

Magnetic Snap Charging Function

The magnetic snap head supports fast charging (5V-900mA).


Back to Top

Adjustable DPI

Press the DPI adjustment button to instantly change the mouse tracking resolution.
Alienware 720M Tri-Mode Wireless Gaming Mouse Adjustable DPI
Figure 4: Alienware 720M Tri-Mode Wireless Gaming Mouse Adjustable DPI

DPI Blue 800: Blue
DPI Green 1200: Green (default)
DPI Yellow 1600: Yellow
DPI Purple 2400: Purple
DPI Red 3200: Red
NOTE: You can change the default DPI settings and customize the DPI stages with the Alienware Command Center (AWCC) application.


Back to Top

 

Setting up your Alienware 720M Wired Gaming Mouse

NOTE:
  • The mouse supports both wired and wireless mode.
  • Your mouse has a rechargeable battery. For best results, ensure that the battery is fully charged before using it for the first time.
  • To improve battery life, turn off the power switch when the mouse is not used.
  • When using magnetic charging, turn on the power switch to ensure seamless connectivity.

Connecting the Alienware 720M Tri-Mode Wireless Gaming Mouse

  1. Remove the clip, dongle extender, USB wireless dongle, and USB-C magnetic dongle from the accessory box.

    Accessory box
    Figure 5: Accessory box

  2. Remove the protective sheet at the bottom of the mouse.

    Remove the protective sheet
    Figure 6: Protective sheet at the bottom of the mouse

  3. Slide the power button down to turn on the mouse.

    Slide the power button
    Figure 7: Slide the power button


Back to Top

To connect using Wireless mode (2.4 GHz)

Laptop
  1. Slide the mode button to 2.4G.

    Turn On the wireless mode (2.4GHz)
    Figure 8: Switch for Wireless mode (2.4 GHz)

  2. Connect the USB wireless dongle to a USB port on your laptop.

    Connect the mouse cable to the USB port
    Figure 9: Connect the USB wireless dongle

Desktop
  1. Slide the mode button to 2.4G.

    Turn On the wireless mode (2.4GHz)
    Figure 10: Switch for Wireless mode (2.4 GHz)

  2. Connect the USB-C end of the USB charging cable to the bottom port of the dongle extender. Insert the USB wireless dongle to the top port of the dongle extender.
  3. Connect the other end of the USB charging cable to an available port on your computer.

    Connect the mouse cable to the USB port
    Figure 11: Connect the USB wireless dongle


Back to Top

To connect using Wireless mode (Bluetooth)

  1. Slide the mode button down to ‹ BT Icon ›. Slide the button down and hold it for three seconds. The DPI LED will blink indicating your wireless mouse is in pairing mode.

    Bluetooth pairing mode
    Figure 12: Bluetooth pairing mode

  2. Pair your wireless mouse with your Bluetooth-enabled computer.


Back to Top

To connect using USB charging cable

NOTE: The battery starts charging automatically in wired mode.
  1. Connect the USB-C end of the USB charging cable to the USB-C port on the mouse.
  2. Connect the other end of the USB charging cable to an available USB port on your desktop or laptop.

    Connect USB charging cable to USB port on your desktop or laptop
    Figure 13: Connect USB charging cable to USB port on your desktop or laptop


Back to Top

 

Installing the Alienware Command Center (AWCC) and Alienware Gaming Peripheral Driver

To control the features and options you will need the Alienware Command Center (AWCC) and Alienware Gaming Peripheral driver. You can get the latest versions directly from the Dell Support Site. For more information, see instructions below.

NOTE:
  • AWCC requires Windows 10 version 16299 or later.
  • It is recommended that you update Windows and the drivers for your computer before installing the Alienware Command Center. For more information, see Microsoft Knowledge Base article Windows Update: FAQExternal Link and Dell Knowledge Base article Drivers and Downloads FAQs.
  • When your computer is preinstalled with AWCC 5.2.45.0 or later, you must install the Alienware Gaming Peripheral driver. Once installed, you can configure your Alienware 720M Gaming Mouse. For more information, see Dell Knowledge Base article Alienware Command Center Quick Guide.
  • When your computer is not preinstalled with 5.2.45.0 or later, perform the following steps to install the latest AWCC and Alienware Gaming Peripheral driver. AWCC 5.2.42 or later can co-exist with older versions of AWCC on the same computer. You can continue to use the older version to configure your computer.

Installing AWCC through Windows Update

  1. Connect your Alienware peripheral to your computer through the USB port. The AWCC application is downloaded and installed automatically. AWCC installation may take up to 10 minutes to complete.
  2. Go to the program folder to ensure that the AWCC installation is complete.
  3. Launch AWCC and perform the following steps to download the additional software components:
    • In the Settings window, click Windows Update, and then click Check for updates to check the Alienware driver update progress.
    • If the driver update is not responding in your computer, install AWCC from the Dell Support website.

Installing AWCC from the Dell Support website

  1. Ensure that the computer is connected to the Internet.
  2. Go to the Alienware Wired Gaming Mouse AW720M Drivers page.
  3. Select the Operating System installed on your computer.
  4. Locate the latest Alienware Command Center Application.
  5. Click Download and save the file to your computer.
  6. Open File Explorer and browse to the location where the downloaded file is saved.
  7. Double-click the Alienware Command Center Application setup file and follow the on-screen instructions to complete the installation process.

 


Back to Top

Troubleshooting

 

Problems Possible solutions
Mouse is not functioning

Turn ON the power turn on the bottom of the mouse and try again.
Mouse is not functioning
  1. In wireless mode, ensure that the battery has sufficient battery power.
  2. Slide the power button to turn off the mouse and then turn on again.
  3. In wired mode, connect the USB charging cable to another USB port. Wait until a notification appears indicating that the driver installation is complete before you use the mouse.
  4. In 2.4 GHz wireless mode, connect the USB wireless dongle to another USB port or connect the USB wireless dongle and USB charging cable to the dongle extender. Wait until a notification appears indicating that the driver installation is complete before you use the mouse.
  5. Restart the computer.
Mouse lights do not turn on
  1. Press any button to wake the mouse from sleep mode.
  2. In wireless mode, ensure that the battery has sufficient battery power.
  3. In wired mode, connect the USB charging cable to another USB port. Wait until a notification appears indicating that the driver installation is complete before you use the mouse.
  4. In 2.4 GHz wireless mode, connect the USB wireless dongle to another USB port. Alternatively, connect the USB wireless dongle and USB charging cable to the dongle extender. Wait until a notification appears indicating that the driver installation is complete before you use the mouse.
  5. Restart the computer.
Mouse is not running based on the configuration selected in the Alienware Command Center (AWCC) application.
  1. Ensure that the Alienware Command Center (AWCC) application is installed on your computer.
  2. Open the Alienware Command Center (AWCC) application and ensure that the selected configuration is set up and saved.
Resolving cursor issues
  1. In wired mode, connect the USB charging cable to another USB port. Wait until a notification appears indicating that the driver installation is complete before you use the mouse.
  2. In 2.4 GHz wireless mode, connect the USB wireless dongle to another USB port. Alternatively, connect the USB wireless dongle and USB charging cable to the dongle extender. Wait until a notification appears indicating that the driver installation is complete before you use the mouse.
  3. Ensure that the sensor is not obstructed or dirty.
  4. Glass or very smooth glossy surfaces are not suitable for the mouse sensor to capture movement. Using a dark-colored fabric mouse pad can improve the tracking.
  5. Save any data, close any open programs, and then restart the laptop or desktop. When you do not have another mouse or touchscreen, hold the power button down for at least 15 seconds to turn the laptop/desktop off. Any unsaved data will be lost.
Resolving mouse button issues
  1. Ensure that there is nothing preventing the mouse buttons from moving. Most mouse buttons make a clicking noise when pressed down.
  2. In wired mode, connect the USB charging cable to another USB port. Wait until a notification appears indicating that the driver installation is complete before you use the mouse.
  3. In wireless mode, connect the USB wireless dongle to another USB port or connect the USB wireless dongle and USB charging cable to the dongle extender. Wait until a notification appears indicating that the driver installation is complete before you use the mouse
  4. Save any data, close any open programs, and then restart the laptop or desktop. When you do not have another mouse or touchscreen, hold the power button down for at least 15 seconds to turn the laptop or desktop off. Any unsaved data will be lost.
Troubleshooting a slow moving cursor
  1. Ensure that the sensor is not obstructed or dirty.
  2. Glass or very smooth glossy surfaces are not suitable for the mouse sensor to capture movement. Using a dark-colored fabric mouse pad can improve the tracking.
  3. Change the mouse settings to adjust the pointer speed.
    Click the tab that matches the Operating System (OS) installed on your laptop or desktop and perform the steps within that section to change the settings.
    • In the Search box, type main.cpl.
    • Click or tap main.cpl in the list of programs.
    • Click or tap the Pointer Options tab.
    • Move the slider under Select a Pointer Speed to adjust the cursor speed to the desired level.
    • Click or tap OK.
Troubleshooting cursor lagging

Cursor lagging might be due to wireless interference on the USB wireless dongle. Use the dongle extender to connect the USB dongle to the laptop or desktop.
Troubleshooting lift off distance (LOD) surface calibration issues

The LOD surface calibration depends on the surface characteristics and does not work on all surfaces.

Using a dark colored fabric mouse pad improves LOD calibration.
 


Back to Top

 

Additional Information

 

Dell AW720M Alienware Wired Gaming Mouse Support Site

Learn how to use and troubleshoot problems with the AW720M you use with your computer. You can find information about Troubleshooting steps, How-To guides and relevant Support Videos for assistance.

For the Dell AW720M Alienware Wired Gaming Mouse User Guide, browse to the Dell Alienware Wired Gaming Mouse AW720M Online Manual Page, and then touch or click View PDF to the right of AW720M User Guide, located in the Manuals and Documents section.


Back to Top

Berørte produkter

Alienware Tri-Mode Wireless Gaming Mouse AW720M
Artikkelegenskaper
Artikkelnummer: 000198072
Artikkeltype: How To
Sist endret: 05 apr. 2022
Versjon:  1
Få svar på spørsmålene dine fra andre Dell-brukere
Støttetjenester
Sjekk om enheten din er dekket av støttetjenestene.