Ga naar hoofdinhoud
Uitloggen

Welkom bij Dell

Mijn account
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
Inloggen Een account maken Inloggen bij Premier Aanmelden voor partnerprogramma
Contact

Uw Dell.com-winkelwagentjes

ME5: How to locate the PowerVault enclosure service tag

Samenvatting: The enclosure service tag is a seven-digit alphanumeric number. It is found using the PowerVault Manager, command-line interface (CLI), or on an information tag at the front of the enclosure. This information is used to route support calls to appropriate personnel when contacting Dell EMC technical support. ...

Dit artikel is van toepassing op   Dit artikel is niet van toepassing op 
Bronnen bekijken voor

Instructies

On the enclosure
The Service Tag and Express Service Code are found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the back of the storage system chassis. 

Using PowerVault Manager 
The About panel (Maintenance > About) shows information about the system, its hardware, and its storage configuration.

The Service Tag is the seven-digit alphanumeric number that is written after the enclosure <number>:

image.png


Using the Command Line Interface (CLI)
The Service Tag is the seven-digit alphanumeric number that is shown in the output of either of the following commands:

  • show service-tag-info
  • show enclosures
Open an SSH session to either controllers' management IP address. 
# show service-tag-info

Encl Service Tag
--------------------------------------
0    ABCD123
--------------------------------------
Success: Command completed successfully. (2022-01-21 04:16:23)

Getroffen producten

PowerVault ME5012, PowerVault ME5024, PowerVault ME5084