メイン コンテンツに進む
  • すばやく簡単にご注文が可能
  • 注文内容の表示、配送状況をトラック
  • 会員限定の特典や割引のご利用
  • 製品リストの作成とアクセスが可能
  • 「Company Administration(会社情報の管理)」では、お使いのDell EMCのサイトや製品、製品レベルでのコンタクト先に関する情報を管理できます。

Isilon: Gen6 클러스터의 배터리 마모 임계값을 확인하는 방법

概要: 이 문서에서는 Gen6 Isilon 노드의 배터리 백업 유닛에 대한 배터리 마모 임계값을 확인하는 방법에 대해 설명합니다.

この記事は自動翻訳されたものである可能性があります。品質に関するフィードバックがある場合は、このページの下部にあるフォームを使用してお知らせください。

文書の内容


手順

이 문서에서는 일반적인 목적으로 BBU(Battery Backup Unit)의 배터리 수명을 확인하는 방법에 대해 설명합니다. 또는 다음과 유사한 이벤트를 수신한 경우:

Warning battery: The battery backup unit in chassis XXXXXXXXXXXXXX slot 2 has indicated cell End Of Life. Replace the battery backup unit as soon as possible.

필수 구성 요소:
클러스터에서 상태 점검 프레임워크 35 이상 및 다음 OneFS 버전 중 하나를 실행해야 합니다.

  • 9.1.0.21 이상
  • 9.2.1.14 이상
  • 위에 나열된 버전보다 최신 버전의 OneFS
지침:
 
설치된 상태 점검 프레임워크의 버전을 확인하는 방법:
  1. 다음 명령을 실행합니다.
# isi healthcheck version
HealthCheck definition version: 35.0.0
배터리 마모 임계값을 확인하는 방법:
  1. 다음 명령을 실행합니다.
# isi healthcheck run battery_test_status -v
Queued evaluation to run: battery_test_status20231011T1718
상태 점검 작업의 상태를 확인하는 방법:
  1. 다음 명령을 실행합니다.
isi healthcheck list | grep battery_test_status20231011T1718

Completed - Pass -                                                  /ifs/.ifsvar/modules/health-check/results/evaluations/battery_test_status20231011T1718

배터리의 마모 임계값을 보려면 상태 점검 목록 출력에 나열된 battery_test_status 파일을 확인해야 합니다.
# cat /ifs/.ifsvar/modules/health-check/results/evaluations/battery_test_status20231011T1718
{"checklist_id": "battery_test_status", "delivery": [], "id": "battery_test_status20231011T1718", "overrides": [], "parameters": {}, "start_time": 1697044712.9590354}
{"name": "battery_test_status", "parameters": {}, "status": "OK", "value": 100, "details": ["Battery 1 has 0 most recent test failures, threshold is 3", "Battery 1 Permanent fault status is False", "Battery 1 Capacity Degradation: 137600 mAh, 13.1%"], "node": "1", "passed": true}
{"name": "battery_test_status", "parameters": {}, "status": "OK", "value": 100, "details": ["Battery 1 has 0 most recent test failures, threshold is 3", "Battery 1 Permanent fault status is False", "Battery 1 Capacity Degradation: 136100 mAh, 12.96%"], "node": "2", "passed": true}
{"name": "battery_test_status", "parameters": {}, "status": "OK", "value": 100, "details": ["Battery 1 has 0 most recent test failures, threshold is 3", "Battery 1 Permanent fault status is False", "Battery 1 Capacity Degradation: 136850 mAh, 13.03%"], "node": "3", "passed": true}
{"name": "battery_test_status", "parameters": {}, "status": "OK", "value": 100, "details": ["Battery 1 has 0 most recent test failures, threshold is 3", "Battery 1 Permanent fault status is False", "Battery 1 Capacity Degradation: 136400 mAh, 12.99%"], "node": "4", "passed": true}
{"result":"PASS"}
백분율tage 값은 배터리의 마모량을 나타냅니다.

셀 수명 종료 경고

BBU(Battery Backup Unit) 펌웨어 2.20에는 배터리의 EOL(End of Life)에 도달하면 경고하는 알림이 추가되었습니다. 이 이벤트에 대한 보고서는 배터리 성능 저하가 40%에 도달하면 발생합니다. 배터리가 50%에 도달하면 노드가 RO(Read-Only) 상태가 됩니다. BBU 펌웨어를 확인하려면 다음 명령을 실행합니다.
isi upgrade cluster firmware devices | egrep "mongoose|bcc"

명령의 출력은 다음과 같습니다.

# isi upgrade cluster firmware devices| egrep "mongoose|bcc"
MLKbem_mongoose           ePOST  02.40                   1-4
EPbcc_infinity            ePOST  02.40                   5-8

BBU 펌웨어는 40% 성능 저하에서 50% 성능 저하로 전환되는 시간에 영향을 미칩니다.

BBU 펌웨어 버전이 1.20인 경우 배터리가 40%에서 50%로 저하되는 데 4개월이 걸립니다.
BBU 펌웨어 버전이 2.20 이상인 경우 배터리가 40%에서 50%로 저하되는 데 12개월이 걸립니다.

BBU 펌웨어 버전 1.20 이하가 설치되어 있고 지원되는 최신 펌웨어로 업그레이드하려면 먼저 다음 문서를 검토해야 합니다. 노드 펌웨어 패키지 10.3.9 또는 11.6으로 업그레이드하기 전에 배터리 테스트를 수행하는 방법

文書のプロパティ


影響を受ける製品

Isilon A200, Isilon A2000, Isilon F800, Isilon F810, Isilon Gen6, Isilon H400, Isilon H500, Isilon H5600, Isilon H600

最後に公開された日付

31 5月 2024

バージョン

5

文書の種類

How To