Passer au contenu principal
Quitter

Bienvenue dans l’univers Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
Se connecter Créer un compte Connexion au compte Premier Connexion au programme de partenariat

Latitude 3189 Teardown removal guide for customer replaceable units (CRUs)

Résumé: This article shows the best way to remove those parts of the Latitude 3189 notebook that Dell considers safe for anyone to complete.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.
Consulter d’autres ressources

Symptômes

These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of a Latitude 3189 system. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace.) The guides will also include pictures to reference what's involved.

Table of Contents:

  1. CRU Removal Guide
  2. Removal Instructions

 

Removal Guide

 

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

The article below provides information on safe practises to take into consideration before working with electrical equipment.

Cause

 

Removal Instructions

 

SLN307592_en_US__1icon Note: Please click on the title of the section you want to open below, in order to see the contents.
 
|

 

SLN307592_en_US__2ReqTools_E7450_BKeith_01

1 Small Phillip's head screwdriver 2 Plastic Scribe
3 Small Flat head screwdriver    
 
SLN307592_en_US__1icon Note: Be aware that using a large Phillips or Flat Head screwdriver may result in damage to the head of the screws. This would make their removal impossible without speciality tools, that aren't available to our onsite engineers.
 

 

  1. Pre-Removal Instructions Before removing the Main Access Panel:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

  2. Turn your system onto it's lid and release the seven (7) captive screws that secure the base to the chassis [1].

SLN307592_en_US__43189_BaseCover_BK_01

  1. Use a plastic scribe to pry the base cover starting from the hinges to the top edge of the cover [2] and lift it from the PC.

SLN307592_en_US__53189_BaseCover_BK_02

 

  1. Pre-Removal Instructions Before removing the Battery:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the Base Cover

  2. Disconnect the battery cable from the motherboard [1] and remove the three (3) screws securing the battery [2].

SLN307592_en_US__63189_Battery_BK_01

  1. Pull the battery out of the computer [3].

 

  1. Pre-Removal Instructions Before removing the Keyboard:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the Base Cover and Battery

  2. Disconnect the keyboard cable from the motherboard [1] and use a plastic scribe to release the keyboard at the threaded holes [2].

SLN307592_en_US__73189_Kybd_BK_01

  1. Slide the keyboard away from the screen.

SLN307592_en_US__83189_Kybd_BK_02

  1. Lift the keyboard away from the system.

SLN307592_en_US__93189_Kybd_BK_03

 

  1. Pre-Removal Instructions Before removing the M.2 Solid State Drive (SSD):

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the Base Cover and Battery

  2. Remove the screw that secures the SSD card down [1], then lift the card up and out of the system [2].

SLN307592_en_US__103189_SSD_BK_01

 

  1. Pre-Removal Instructions Before removing the SD Micro Memory Card:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

  2. Press in on the Micro SD Card and then release to have it pop out of the slot.

  3. Pull the Micro SD Card out of the computer.

Résolution

If you require further assistance, contact technical Support.
  Contact Us  

Produits concernés

Latitude 3189
Propriétés de l’article
Numéro d’article: 000140531
Type d’article: Solution
Dernière modification: 02 Oct 2023
Version:  5
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.