Passer au contenu principal
Quitter

Bienvenue chez Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Voir les commandes et de suivre l'état de votre expédition
  • Profitez membres seulement récompenses et des remises
  • Créez et accédez à une liste de vos produits
  • Gérez vos sites Dell EMC, vos produits et vos personnes-ressources pour les produits dans Administration de l’entreprise.
Connexion Créer un compte Connexion Premier Connexion au programme Partner
Nous contacter

Vos paniers Dell.com

Numéro d’article: 000130772

PowerEdge: How To Export SupportAssist with a Controller Log Using the Lifecycle Controller

Sommaire: The article explains how to export SupportAssist with a controller log using the Lifecycle Controller.

Cet article peut avoir été traduit automatiquement. Si vous avez des commentaires sur sa qualité, veuillez nous en faire part en utilisant le formulaire au bas de cette page.

Contenu de l’article

Symptômes

This article provides information about exporting the Tech Support Report (TSR), SupportAssist Collection, and the RAID controller log using the Lifecycle Controller of Dell PowerEdge servers.

This article is valid for Dell PowerEdge servers using iDRAC7 and 8.

Click Watch this Video for an informative video guide.

Cause

Not required

Résolution

For log creation using the integrated Dell Remote Access Controller (iDRAC), see Dell article, Export Dell SupportAssist Collection and RAID Controller Log using iDRAC7 + 8.
 
Note:
  • iDRAC7 firmware must be at least version 2.10.10.10 to offer the option of creating a RAID controller log.
  • Since iDRAC firmware version 2.30.30.30, the former Tech Support Report is called SupportAssist Collection
  • USB driver must be FAT-32 format for the Lifecycle Controller to recognize it.

Steps:

  1. Boot the server and press F10 to enter the Lifecycle Controller.
  2. Select Hardware Diagnostics from the list on the left and select Export SupportAssist collection as shown below.

Hardware diagnostics

Figure 1: Hardware Diagnostics

  1. This takes you to the Terms and Conditions screen, check the box to Agree then click Next at the bottom of the screen.
    Terms and Conditions
    Figure 2: Terms and Conditions

  2. Be sure to select Hardware and RAID Controller Logs (or operating system and Application Data if needed), then click Next at the bottom of the screen.
    Log Selection
    Figure 3: Log Selection

  3. Insert a USB drive (FAT-32 format) or select the appropriate Network Share and enter the location data. Click Next at the bottom of the screen and Finish to complete the process.
    Log Export
    Figure 4: Log Export

    Sample Network Share configuration using CFS
    Figure 5: Sample Network Share configuration using CFS

    Sample Network Share configuration using NFS
    Figure 6: Sample Network Share configuration using NFS

Note: Click Test Network Connection to verify if the Lifecycle Controller UI can connect to the IP address that is provided. By default, it pings the Gateway IP, DNS server IP, host IP, and Proxy IP. Dependent on your configuration, the Network Share name may be the corresponding IP address.

Error Messages

  • Error message when there is a failure in retrieving the selected report data
Error message in retrieving the selected report data
  • Error message when Lifecycle Controller is unable to connect to the network share

Error message when Lifecycle Controller is unable to connect to the network share

  • Error message when the export fails because you have provided an invalid folder name or the USB drive is not found

Error message when the export fails for an invalid folder name or the USB drive is not found

  • Error message when the export fails because there is not enough space to copy to the USB drive

Error message when the export fails because not enough space to copy to the USB drive

  • Error message when the export fails because the USB drive is read-only

Error message export fails because the USB drive is read-only

Renseignements supplémentaires

Watch this video for an informative video guide:

Propriétés de l’article

Produit touché

PowerEdge, iDRAC7, iDRAC8, Lifecycle Controllers

Dernière date de publication

12 juill. 2024

Version

8

Type d’article

Solution

Haut de la page