Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Número del artículo: 000214612

Re-imaging Windows 10 IoT on a Latitude 3440, Latitude 5440, and OptiPlex 7410 AIO

Resumen: Windows 10 IoT may be reinstalled using a USB drive that is supplied by Dell support.

Es posible que este artículo se traduzca automáticamente. Si tiene comentarios sobre su calidad, háganoslo saber mediante el formulario en la parte inferior de esta página.

Contenido del artículo

Instrucciones

Affected Platforms:

  • Latitude 3440
  • Latitude 5440
  • OptiPlex 7410 All-in-One

Affected Operating Systems:

  • Windows 10 IoT Enterprise LTSC 2021
Note: For system board replacement service scenario, the Win 10 IoT operating system Recovery USB drive is dispatched with the replacement system board.
  1. Insert the Windows 10 IoT operating system Recovery USB drive into a USB port of the device.
  2. Power on the device, press F2 to enter BIOS setup.
Note: The BIOS admin password is Fireport
  1. Go to Integrated Devices and Enable USB boot support.

Enable USB boot Support
Figure 1: (English Only) Enable USB boot Support

  1. Go to Storage, SATA/NVMe Operations and select ACHI/NVMe.

Select ACHI/NVMe
Figure 2: (English Only) Select ACHI/NVMe

  1. Go to Virtualization Support, set Enable Pre-Boot DMA Support to Off, set Enable OS Kernel DMA Support to OFF.

Set Enable Pre-Boot DMA Support to Off, set Enable OS Kernel DMA Support to OFF
Figure 3: (English Only) Set Enable Pre-Boot DMA Support to Off, set Enable OS Kernel DMA Support to OFF

  1. Save the settings and Exit.
  2. When the device reboots, press F12 to trigger the Boot Menu and select the bootable Windows 10 IoT operating system Recovery USB drive and Press Enter.

Select the bootable Windows 10 IoT OS Recovery USB key and Press Enter
Figure 4: (English Only) Select the bootable Windows 10 IoT operating system Recovery USB drive and Press Enter

  1. Select the operating system image and click OK. This starts the installation process.

Select the operating system image and click OK
Figure 5: (English Only) Select the operating system image and click OK

  1. After the installation is complete, the device will reboot. Remove the operating system Recovery USB drive.
  2. Press F12 to trigger the Boot Menu and select the SSD/HDD storage where Windows 10 IoT operating system is installed and Press Enter.
  3. Windows IoT boots to the desktop.

Windows 10 IoT Desktop
Figure 6: (English Only) Windows 10 IoT Desktop

Propiedades del artículo

Producto comprometido

Latitude 3440, Latitude 5440, OptiPlex All-In-One 7410

Fecha de la última publicación

07 jun 2024

Versión

8

Tipo de artículo

How To

Volver al principio