Ikke-konvergeret netværkskonfiguration med Dell Azure Stack HCI
Summary: Eksempel på, hvordan du konfigurerer et ikke-konvergeret netværk til en Dell EMC Solutions Microsoft Azure Stack HCI-klyngevært. Dette eksempel omfatter ikke et sikkerhedskopieringsnetværk eller en netværksformingskonfiguration som beskrevet i brugervejledningen. Oplysninger om denne artikel er taget fra referencevejledningen "Dell EMC Solutions for Microsoft Azure Stack HCI – Network Integration and Host Network Configuration Options" (Dell EMC-løsninger til Microsoft Azure Stack HCI – Netværksintegration og konfigurationsindstillinger for værtsnetværk). ...
This article applies to
This article does not apply to
Instructions
Skærmbillede nedenfor er en visning af hardwarediagrammet for konfiguration af et Ikke-konvergeret Azure Stack-netværk ved hjælp af et SET-netværksteam til administrationsnetværkskommunikation:
Scripttrinnene nedenfor køres i et administrativ PowerShell-vindue:
Scripttrinnene nedenfor køres i et administrativ PowerShell-vindue:
$ErrorActionPreference = 'Stop'
#region Variables for the scenario
## Management Adapter
$ManagementSwitchName = 'Management'
$ManagementNetAdapterName = @('NIC1','NIC2')
$ManagementAdapterName = 'Management'
# VLAN ID for host management traffic; if no VLAN is preferred set this to 0
$ManagementVlanId = 102
# Management Gateway address
$ManagementGateway = '10.0.0.1'
# DNS Server Address
$ManagementDns = '10.0.0.15'
# Set this to a string 'DHCP' for a dynamic IP address
$ManagementIPAddress = '10.0.0.51'
# Management address prefix (24 translates to subnet mask 255.255.255.0)
$ManagementAddressPrefix = 24
## Storage Adapters
### You must specify 2 or 4 network adapter port names
$StorageNetAdapterName = @('SLOT 2 PORT 1', 'SLOT 2 PORT 2')
### You must specify 1 or 2 or 4 VLANIDs
### Specify 0 if you want the network not tagged with any VLAN
$StorageVlanId = @(103, 104)
### You must specify 2 or 4 IP Addresses
### DHCP as a value is accepted if you want dynamically assigned IP addresses
$StorageIPAddress = @('172.16.101.1', '172.16.102.1')
### You can specify 1 or 2 or 4 prefix length values (24 translates to subnet mask
255.255.255.0)
$StorageAddressPrefix = @(24)
#endregion
## Create a VM switch for management
$null = New-VMSwitch -Name $ManagementSwitchName -AllowManagementOS 0 -NetAdapterName
$ManagementNetAdapterName -MinimumBandwidthMode Weight -Verbose
## Add VM Network Adapters and configure VLANs and IP addresses as needed
### Configure Management Adapter
$managementAdapter = Add-VMNetworkAdapter -SwitchName $ManagementSwitchName
-ManagementOS -Passthru -Name $ManagementAdapterName -Verbose
if ($ManagementVlanId -and ($ManagementVlanId -ne 0))
{
# Set VM Network adapter VLAN only if the VLAN ID specified is other than 0
Set-VMNetworkAdapterVlan -VMNetworkAdapter $managementAdapter -Access -VlanId
$ManagementVlanId -Verbose
Start-Sleep -Seconds 5
}
if ($ManagementIPAddress -ne 'DHCP')
{
$null = New-NetIPAddress -InterfaceAlias "vEthernet ($ManagementAdapterName)"
-IPAddress $ManagementIPAddress -DefaultGateway $ManagementGateway -PrefixLength
$ManagementAddressPrefix -Verbose
Set-DnsClientServerAddress -InterfaceAlias "vEthernet ($ManagementAdapterName)"
-ServerAddresses $ManagementDns -Verbose
}
{
# if there is a single VLAN for storage use the first and only element
if ($storageVlanId.Count -eq 1)
{
$storageVlan = $storageVlanId[0]
}
else
{
# else use the right index to get the VLAN ID
$storageVlan = $storageVlanId[$i]
}
# Check if only one prefix is provided
if ($StorageAddressPrefix.Count -eq 1)
{
$StoragePrefix = $StorageAddressPrefix[0]
}
else
{
# if more than one, use the right index to get the address prefix
$StoragePrefix = $StorageAddressPrefix[$i]
}
if ($storageVlan -and ($storageVlan -ne 0))
{
# Set VM Network adapter VLAN only if the VLAN ID specified is other than 0
Set-NetAdapterAdvancedProperty -Name $StorageNetAdapterName[$i] -DisplayName
'VLAN ID' -DisplayValue $storageVlan -Verbose
Start-Sleep -Seconds 5
}
if ($StorageIPAddress[$i] -ne 'DHCP')
{
$null = New-NetIPAddress -InterfaceAlias $StorageNetAdapterName[$i] -IPAddress
$StorageIPAddress[$i] -PrefixLength $StoragePrefix -Verbose
}
}