CLI:
- 通过 ssh/putty 以 sysadmin 身份登录到 Data Domain 系统
- 检查当前配置。
- # support notification method show
- # support connectemc config show
- 向 ESRS 注册 DD
- # support connectemc device register <DDR IP> esrs-gateway <the ESRS GW hostname>
- 它将提示输入 Service Link 用户名和密码。可以使用客户的支持凭据。(查看戴尔支持站点时的相同凭据)
- 示例输出:
# support connectemc device register 10.10.10.10 esrs-gateway myesrsgw01
Enter Service Link username: admin
Enter Service Link password: <nothing displayed as you type>
设备注册到 ESRS 网关。
- 注册成功后,再次检查配置,并将通知方法设置为“connectemc”。
- # support connectemc config show
- 示例输出:
# support connectemc config show
ConnectEMC Configuration:
ESRS gateway IP/hostname: myesrsgw01
Registered device IP(s): 10.10.10.10
-
- # support notification method set connectemc
- # support notification method show
- 测试连接
- # support connectemc test
- 示例输出:
# support connectemc test
Sending test message through ConnectEMC...
Test message successfully sent through ConnectEMC.
GUI:
- Maintenance > Support > Configure Channel
- 选择“Secure Remote Services”
- 输入 ESRS 主机名并选择 DD IP
- 输入 Service Link 凭据(查看戴尔支持站点时的相同凭据)
- 注册完成
如果您在此过程中遇到任何错误,请捕获该错误,并向支持部门提出服务请求。