Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Data Domain 如何将 Data Domain 添加/注册到 ESRS 网关

Summary: 摘要:本文档详细介绍将 Data Domain 系统注册/添加到 ESRS 网关的步骤。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

CLI:
  1. 通过 ssh/putty 以 sysadmin 身份登录到 Data Domain 系统
  2. 检查当前配置。
    1.  # support notification method show
    2. # support connectemc config show
  3. 向 ESRS 注册 DD
    1. # support connectemc device register <DDR IP>  esrs-gateway <the ESRS GW hostname>
      1. 它将提示输入 Service Link 用户名和密码。可以使用客户的支持凭据。(查看戴尔支持站点时的相同凭据)
      2. 示例输出:
# support connectemc device register 10.10.10.10 esrs-gateway myesrsgw01
Enter Service Link username: admin
Enter Service Link password: <nothing displayed as you type>

设备注册到 ESRS 网关。
  1. 注册成功后,再次检查配置,并将通知方法设置为“connectemc”。
    1. # support connectemc config show
      1. 示例输出:
 # support connectemc config show
    ConnectEMC Configuration:
        ESRS gateway IP/hostname:    myesrsgw01
        Registered device IP(s):     10.10.10.10
    1. # support notification method set connectemc
    2.  # support notification method show
  1. 测试连接
    1.  # support connectemc test
      1. 示例输出:
# support connectemc test
    Sending test message through ConnectEMC...
    Test message successfully sent through ConnectEMC.

GUI:
  1. Maintenance > Support > Configure Channel
  1. 选择“Secure Remote Services”
  1. 输入 ESRS 主机名并选择 DD IP
  1. 输入 Service Link 凭据(查看戴尔支持站点时的相同凭据)
  2. 注册完成

如果您在此过程中遇到任何错误,请捕获该错误,并向支持部门提出服务请求。

Affected Products

Data Domain
Article Properties
Article Number: 000197719
Article Type: How To
Last Modified: 15 Dec 2022
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.