Dell EMC Networking OS6 Switches - How to Directly Login to Privileged EXEC Mode via SSH/Telnet
Summary: This article explains how to directly login to Privileged EXEC Mode via SSH/Telnet using local user database (skips enable mode) on a Dell N-Series Switch
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Authorization allows the administrator to control which services a user is allowed to access. This configuration uses the local user database for authorization, such that a user can enter privileged EXEC mode directly.
Command Syntax
| Command |
Explanation |
| Console# configure terminal |
Enter config mode |
| Console(config)# aaa authorization exec default local |
Configure an user to enter privileged EXEC mode using local method. |
Verification
You can verify the authorization methods using the below command
Console# show authorization methods
Exec Authorization List Methods
---------------------------- ------------------------------
dfltExecAuthList local
Command Authorization List Methods
---------------------------- ------------------------------
dfltCmdAuthList none
Line Exec Method Lists Command Method Lists
--------- --------------------- ---------------------
Console dfltExecAuthList dfltCmdAuthList
Telnet dfltExecAuthList dfltCmdAuthList
SSH dfltExecAuthList dfltCmdAuthList
Network Authorization Methods
---------------------- -------
Dot1x none
Affected Products
N Series, PowerSwitch N1100-ON Series, PowerSwitch N1500 Series, PowerSwitch N2000 Series, PowerSwitch N2100 Series, PowerSwitch N3000 Series, Dell EMC PowerSwitch N3000E-ON Series, Dell EMC PowerSwitch N3100 SeriesArticle Properties
Article Number: 000183834
Article Type: How To
Last Modified: 01 Apr 2021
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.