Article Number: 000183834
Dell EMC Networking OS6 Switches - How to Directly Login to Privileged EXEC Mode via SSH/Telnet
Summary: This article explains how to directly login to Privileged EXEC Mode via SSH/Telnet using local user database (skips enable mode) on a Dell N-Series Switch
Article Content
Instructions
Authorization allows the administrator to control which services a user is allowed to access. This configuration uses the local user database for authorization, such that a user can enter privileged EXEC mode directly.
Command Syntax
| Command |
Explanation |
| Console# configure terminal |
Enter config mode |
| Console(config)# aaa authorization exec default local |
Configure an user to enter privileged EXEC mode using local method. |
Verification
You can verify the authorization methods using the below command
Console# show authorization methods
Exec Authorization List Methods
---------------------------- ------------------------------
dfltExecAuthList local
Command Authorization List Methods
---------------------------- ------------------------------
dfltCmdAuthList none
Line Exec Method Lists Command Method Lists
--------- --------------------- ---------------------
Console dfltExecAuthList dfltCmdAuthList
Telnet dfltExecAuthList dfltCmdAuthList
SSH dfltExecAuthList dfltCmdAuthList
Network Authorization Methods
---------------------- -------
Dot1x none
Article Properties
Affected Product
N Series, PowerSwitch N1100-ON Series, PowerSwitch N1500 Series, PowerSwitch N2000 Series, PowerSwitch N2100 Series, PowerSwitch N3000 Series, Dell EMC PowerSwitch N3000E-ON Series, Dell EMC PowerSwitch N3100 Series
Last Published Date
01 Apr 2021
Version
1
Article Type
How To