문서 요약: 이 문서에서는 PowerConnect 6200 시리즈 스위치에서 스태킹을 설정하는 프로세스를 제공합니다.
다음 명령은 인터페이스의 모드를 변경한 다음 스위치를 재부팅합니다.
console#config
console(config)#stack
console(config-stack)#stack-port 1/xg1 stack
console(config-stack)#stack-port 1/xg2 stack
console(config-stack)#end
console#copy running-configuration startup-configuration
console#reload
지침에 따라 각 스위치를 최신 펌웨어로 업데이트합니다.
스위치를 끕니다. 스택에 있는 각 스위치의 경우, 스태킹 케이블 1개를 스위치의 스택 포트 1에서 다음 스위치의 스택 포트 2로 연결합니다. 마지막 스위치에서는 포트 1에서 스택에 있는 첫 번째 스위치의 포트 2로 케이블을 연결합니다.
먼저 원하는 마스터 스위치를 켭니다. 그런 다음 모든 스위치를 하나씩 차례로 켭니다.
console#show switch는 스위치 상태, 펌웨어 코드 및 스택에 있는 스위치의 수를 표시합니다. 이 스위치를 사용하여 스태킹을 확인합니다.