Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

How To Run Grab On An AIX Host

Summary: This article describes step by step, how-to-create a Grab for an AIX host.

This article applies to   This article does not apply to 

Symptoms

Must run Grabs on an AIX host.

Cause

Must run Grab.

Resolution

Instructions for running the Grab on a AIX host.

Ensure that this is done with root account.

Download the grab utility from https://central.dell.com/solutions/GrabUnixLinux (requires a Dell account). 

  1. Create a directory for grab.
  2. Change (CD) to the directory. created in Step 1.
  3. Put the grab utility in that directory.
  4. Untar grab utility [tar  xvf emcgrab_AIX_v4.7.1.tar].
  5. When it untars, it creates a directory inside that directory called grab.
  6. Cd into the underlying grab directory (now you are in /grab/grab).
  7. Do a ll or ls to see the packages in there, look for grab.sh.
  8. After finding the gab.sh there, run [./emcgrab.sh] while inside that directory.
  9. This runs the utility usually takes 10 minutes or more to run, and creates a directory that is called outputs. The grab is copied automatically in there.
Once complete, upload the resulting compressed file (tar file) to the case or provided FTP location.

Additional Information

Note that FTP access requires either Microsoft Internet Explorer or Google Chrome with IETab or Microsoft EDGE with IETab or a third party ftp client

Affected Products

GRAB
Article Properties
Article Number: 000103431
Article Type: Solution
Last Modified: 16 Dec 2022
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.