Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

MTU (maximale transmissie-eenheid)) configureren voor jumboframes in Dell Networking Force10 switches

Summary: Jumboframes op Dell switch configureren, Jumbo-frames instellen op Force10, hoe u MTU configureert op Dell Force10 switch

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions



In dit artikel wordt uitgelegd hoe u de MTU (maximale transmissie-eenheid) voor jumboframes in Dell Networking Force10 switches configureert.

 

De MTU configureren

 

De MTU wordt ingesteld op interfaceniveau.

 

Opdracht Parameter
FTOS# configure Ga naar de configuratiemodus.
FTOS(conf)# interface te 0/1
FTOS(conf)# interface range te 0/1 - 24		 Voer de interface of de reeks interfaces in waarvoor de MTU moet worden ingesteld.
FTOS(conf-if-range-te-0/1-24)# mtu 12000 Stel de MTU-waarde in. De standaardwaarde is 1554. Het waardebereik loopt van 594 t/m 12000
Voor sommige eerdere modellen loopt het bereik van 594 t/m 9252.
FTOS(conf-if-range-te-0/1-24)# no mtu Stelt de opgegeven poorten in op de standaard MTU-waarde van 1554.


 

MTU-status controleren



FTOS#show interfaces te 0/1
TenGigabitEthernet 0/1 is down, line protocol is down (TenGigabitEthernet 0/1 is uitgeschakeld, lijnprotocol is uitgeschakeld)
Hardware is DellEth, address is 00:01:e8:8b:18:bb (Hardware is DellEth, adres is 00:01:e8:8b:18:bb)
Current address is 00:01:e8:8b:18:bb (Huidig adres is 00:01:e8:8b:18:bb)
Pluggable media not present (Insteekmedia niet aanwezig)
Interface index is 17368066 (Interface-index is 17368066)
Internet address is not set (Internetadres is niet ingesteld)
Mode of IPv4 Address Assignment : NONE (Modus van IPv4-adrestoewijzing: GEEN)
DHCP Client-ID :0001e88b18bb (ID van DHCP-client: 0001e88b18bb)
MTU 12000 bytes, IP MTU 11982 bytes    

Affected Products

Force10 MXL Blade, Force10 S2410-01-10GE-24P, Force10 S2410-01-10GE-24CP, Force10 S25-01-GE-24P, Force10 S25-01-GE-24T, Force10 S25-01-GE-24V, Force10 S50-01-GE-48T-V, Force10 S50-01-GE-48T, PowerSwitch S4810P, PowerSwitch S5000, Force10 S50P , Force10 S55T, Force10 S60-44T, PowerSwitch S6000, Force10 Z9000, Dell Networking Z9500 ...
Article Properties
Article Number: 000102843
Article Type: How To
Last Modified: 21 Feb 2021
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.