Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

CloudIQ: General procedures to onboard VxRail into CloudIQ

Summary: Procedure to onboard VxRail into CloudIQ.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

CloudIQ Overview

CloudIQ is a no-cost, cloud-based application that leverages Machine Learning to proactively monitor and measure the overall health of Dell infrastructure and Connectrix switches through intelligent, comprehensive, and predictive analytics. This article steps through the requirements to enable CloudIQ on Dell VxRail Hyperconverged systems.
 

Prerequisites

  • Valid Dell Support Credentials - meaning the user account email being used to log in to CloudIQ has inherited site relationship to the site where the asset resides.  
  • Valid Support Contract - at least one of the nodes within a VxRail cluster must have a ProSupport or ProSupport Plus contract for the cluster to be seen within CloudIQ.
  • The nodes within the VxRail cluster may span more than one site ID, but the Dell user account (email) must have access to all sites where the nodes reside and company profile id should be the same.
  • Connectivity to Secure Remote Services Gateway
Must have incoming port opened for multicluster upgrade in future.
  • For VxRail version 4.5.x, after Secure Remote Services is enabled, enable Telemetry Settings.
  • For VxRail version 4.7.x and 7.0.x, enable Customer Improvement Program during Secure Remote Services configuration.
  • Minimum versions:
    • 4.5.215
    • 4.7.100
    • 7.0
  • VxRail Clusters running v7.0.3.350 or greater can directly connect using the connectivity agent, ESE, or they can use the gateway.
Note: CloudIQ does not support DynamicNodes.
 

Onboarding

Configure Secure Remote Services
See the appropriate VxRail Administration Guide (section "Enabling Secure Remote Services.")

Enable Telemetry for CloudIQ.

For VxRail v4.5.x, you must enable Telemetry Settings. The default and recommended collection level is Basic. This collects samples once per hour.

For VxRail v4.7.x and 7.0.x, you must enable Customer Improvement Program. The default and recommended collection level is Medium. This collects samples once per hour.

VxRail Visibility in CloudIQ
Existing My VxRail Users:

  • VxRail clusters are automatically onboarded to CloudIQ. No additional actions are required.

VxRail users logging in for the first time:

  • Log in to My VxRail - All VxRail clusters are automatically onboarded into CloudIQ. No additional actions are required.
  • Log in to CloudIQ - User steps through CloudIQ onboarding screens including CloudIQ description and licensing agreement. VxRail systems are automatically onboarded to CloudIQ.
Intelligent Multi-System Updates Feature
  • To perform an intelligent multisystem updates operation, each user must enable vCenter-based access control using "Enable vCenter Access Control" wizard from the HCI Settings page.


Accessing CloudIQ Portal

CloudIQ can be accessed by navigating directly to the CloudIQ URL in a web browser.

Log in to CloudIQ using your Dell Pro Support credentials.

CloudIQ Login Screen
Figure 1: Login

When a new user logs in to CloudIQ, they step through the following onboarding screens:
 
CloudIQ Onboarding Screen 1
Figure 2: Onboarding Screen 1
 
CloudIQ Onboarding Screen 2 and 3
Figure 3: Onboarding Screens 2 and 3
 
CloudIQ Onboarding Screen 4
Figure 4: Onboarding Screen 4
 
CloudIQ Onboarding Screen 5
Figure 5: Onboarding Screen 5
 
CloudIQ Onboarding Screen 6
Figure 6: Onboarding Screen 6
 
CloudIQ Onboarding Screen 7
Figure 7: Onboarding Screen 7

Upon logging in to CloudIQ, the user sees all the systems that are successfully sending data to CloudIQ. In situations where the user has not successfully configured any systems to send data to CloudIQ, they are directed to the Connectivity page in the CloudIQ UI where they see their CloudIQ compatible systems.
 
CloudIQ Connectivity Screen
Figure 8: Connectivity Screen

Products

CloudIQ, CloudIQ
Article Properties
Article Number: 000184396
Article Type: How To
Last Modified: 24 May 2024
Version:  14
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.