ECS: GeoDrive – feil under opplasting med flere deler – ECS: 2001 – Ingen tilgang – forbudt (403)

Hvis en vanlig PUT-forespørsel brukes til å erstatte et objekt som allerede eksisterer og er i oppbevaring, mislykkes PUT-forespørselen med denne S3-feilen:

ObjectUnderRetention
If a multi-part (MPU) PUT is used to replace an object that is in retention, it receives this error:

AccessDenied
 The issue here is that a normal PUT and a MPU PUT should return the same error but do not.

Det er mulig at en PUT kan mislykkes med en 500-feil. Hvis dette skjer, ser avsenderen at det er en feil selv om filene ble lastet opp.

Enhver feil forteller GeoDrive at filen var mislykket og er lagt i kø for å prøve på nytt.

Hvis det under forsøket mottar ObjectUnderRetention, forstår GeoDrive at filen er lastet opp og justerer den lokale filen for å gjenspeile dette.

Siden PUT med flere deler returnerer AccessDenied (Ingen tilgang), fortsetter GeoDrive å prøve opplastingen på nytt.

1. Fra GeoDrive-konsollen – bekreft om én av feilene nedenfor blir produsert:

     I. Dobbeltklikk på et eksempel på EN MPU-feil for å bekrefte feilutdataene:

File cannot be uploaded to ECS server. Retries are exhausted (ECSxxxxx_ECSxxxxx): e:\x\x\...
 

  Site=x  File=x  Line=x  Revision=-v2.0.2.2
  Severity=WARNING  Category=0  Process=Server  Error=2149122451:2149122451 - Forbidden (403).
  Time=22/11/2019 2:36:39 988 ms   Thread=15108
Error during multipart upload (e:\xxx) in ECS server ECSxxxxx_ECSxxxxx: 2149122451 - Forbidden (403).
ECS: 2001 - Access Denied
Http: 403 - Forbidden: The server understood the request, but refuses to fulfill it.
S3 Code: AccessDenied
S3 Resource: xxx
S3 RequestID: xxxxxxxx:xxxxxxxxxxx:xxxxx:xxx
     ii. Alternative sample console output indicating this issue:

File cannot be uploaded to ECS server. Retries are exhausted (ECSxxxxx_ECSxxxxx): e:\x

Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.

Error during multipart upload (e:\x) in ECS server ECSxxxxx_ECSxxxxx: 2149122451 - Forbidden (403).
ECS: 2001 - Access Denied

2. Gather and confirm the following system and configuration information to be included the Service Request with ECS Support: 
     i. Version of GeoDrive being used
     ii. Name of the affected ECS bucket and the object user
     iii. The affected drive and any error output included in the GeoDrive console
     iv. If there were any recent changes made to the system's configuration
     v. If the affected files are larger than 128 MB (This is the default size where MPUs are used)
     vi. Has this value been changed (Option - Performance: The threshold is at the bottom of the dialog)

3. If all the affected files are 128 MB or larger, please increase the MPU threshold (If not, please notify ECS Support through a Service Request and include all prior and subsequent information)
     - This increment can be done through Options, then Performance as below (Of the two fields below, the "Minimum Threshold" is the field to be changed):


     - This should cause the larger files to avoid MPU and therefore return the correct error ("ObjectUnderRetention")
     - All files should work on retry
     - When a file is queued for upload, if it fails it will be queued for a retry. If it tries 3 times and fails each time, it gets put on a "failed upload" list. Each failed upload will log the error - After the 3rd retry, it logs an additional error:

File cannot be uploaded to ECS server. Retries are exhausted (ECSxxxxx_ECSxxxxx): e:\x\x\...

     - There is a button on the main UI screen that appears if this happens, and the user can press this button to get a list of failed uploads.
     - If the user ignores it and does not try to force a retry - After 6 hours all failed uploads are put back in the upload queue for 3 more times (All files therefore retry 3 times every 6 hours).

4. If the above does not resolve this issue, please notify ECS Support through a Service Request and include all prior information.