Lights not responding on Alienware and G Series computers after installing the Alienware Command Center
Summary: If the lights on your Alienware computers turn off or stop responding to the changes, you can attempt to run a repair installation using the latest version of the Alienware Command Center. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
When you install the Alienware Command Center, the ELC Firmware can get corrupted causing the lights on the computer to stay off or not responsive to changes done in the Alienware Command Center.
Supported Platforms:
- Alienware and Dell G-Series Platforms Supporting Alienware Command Center 5.0 and higher
Cause
The ELC Firmware may get corrupted for several reasons, including a sudden shutdown, disconnecting or reconnecting the AC Adapter during installation.
Resolution
Run a repair installation of Alienware Command Center following the steps below:
- Download the latest version of Alienware Command Center from the Dell Drivers Page.
- Run the setup without uninstalling the previous version of the Alienware Command Center.
- Once the installation starts you receive a prompt with options to Modify, Repair or Remove.
- Click Repair to force the installation to flash the firmware again.
- Restart the computer and confirm if the issues persist.
Additional Information
|
|
 |
 |
 |
 |
Out of warranty? No problem click here, enter your Service Tag and view our offers.
Currently, offers are only available for US, Canada, UK, and France PC Customers. Server and Storage not applicable.
Affected Products
Alienware Command Center, G Series, AlienwareArticle Properties
Article Number: 000178139
Article Type: Solution
Last Modified: 09 sep 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.