Instructions
Denne artikel viser standardkonsolindstillinger for følgende switch-serier:
PowerConnect 2700, 2800, 3400, 3500, 5400, 5500, 6200, 7000, 8000, 8100
X-serien : X1000 , X4000
Chassis-serien : m6220, m6348, m8024, m8024-k, MXL, IOA , FN410D, FN410T, FN2210S , C9010
N-serien af Campus OS6 : N1500, N2000, N3000, N4000
ON-serien : N1100-ON, N2100PX-ON, N3100PX-ON, N3000E-ON, S3048-ON, S4048-ON , S4100-ON, S4810-ON, S5000-ON, S5100-ON, S5200-ON, S6000-ON, Z9100-ON, Z9200-ON
S-serien af Force10 OS9 : S25, S50, S55, S60, S4810, S4820, S5000, S6000
Z-serien af Force10 OS9 : Z9000, Z9500
I denne artikel antages det, at brugeren har følgende:
Et passende konsolkabel til switchen
En terminalserver, USB til seriel-konverter eller en seriel port
Terminalemulator, der har adgang til den serielle grænseflade
Hver blok af switche anvender indstillingerne i henhold til switch-listen:PowerConnect: 2700, 2800, 3400, 3500, 5400, 5500, 6200, 7000, 8024, 8100 X-serien: X1000, X4000 Kabinetserien: m6220, m6348, 8024, m8024-k, MXL, IOA, C9010 N-serien: N1500, N2000, N3000, N4000 S-serien Force10: S25, S50, S55, S60, S4810, S4820, S5000, S6000
Z-serien af Force10 OS9: Z9000, Z9500
Angiv datahastigheden til 9600 baud
Indstil dataformatet til 8 bits , stop bits til 1 og no parity
Indstil flowstyring til None
S4048-ON -switchen har forskellige standardindstillinger for Micro USB-konsol og RS-232-konsol.
Micro USB:
datahastighed til 9600 baud
dataformat til 8 bits, stop bits til 1 og no parity
flowstyring til none
RS-232-konsol :
datahastighed til 115200 baud
dataformat til 8 bits, stop bits til 1 og no parity
flowstyring til none
Kabinetserien: FN410D, FN410T, FN2210S ON-serien: N1100-ON, N2100PX-ON, N3100PX-ON, N3000E-ON, S3048-ON, S4048-ON, S4100-ON, S4810-ON, S5000-ON, S5100-ON, S5200-ON, S6000-ON, Z9100-ON, Z9200-ON
Angiv datahastigheden til 115200 baud
Indstil dataformatet til 8 bits , stop bits til 1 og no parity
Indstil flowstyring til None
Bemærk: Under Properties (Egenskaber) skal du vælge VT100 for emuleringstilstand. Mange emulatorer anvender denne indstilling som standard og indstillingens placering varierer baseret på den terminalemulator, du bruger.
Affected Products
Force10 S2410-01-10GE-24P, Force10 S2410-01-10GE-24CP, Force10 S25N-S50N, Force10 S25-01-GE-24P, Force10 S25-01-GE-24T, Force10 S25-01-GE-24V, Force10 S50-01-GE-48T-V, Force10 S50-01-GE-48T, PowerSwitch S3048-ON, PowerSwitch S4048-ON
, PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S5000, Force10 S50P, Force10 S55T, Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, Force10 Z9000, Dell Networking Z9500, PowerSwitch N1100-ON Series, PowerSwitch N1500 Series, PowerSwitch N3000 Series, PowerSwitch N4000 Series, Dell Networking X1000 Series, Dell Networking X4000 Series, PowerSwitch Z9100-ON, PowerConnect 2708, PowerConnect 2716, PowerConnect 2724, PowerConnect 2748, PowerConnect 2808, PowerConnect 2816, PowerConnect 2824, PowerConnect 2848, PowerConnect 3424, PowerConnect 3424P, PowerConnect 3448, PowerConnect 3448P, PowerConnect 3524, PowerConnect 3524P, PowerConnect 3548, PowerConnect 3548P, PowerConnect 5424, PowerConnect 5448, PowerConnect 5524, PowerConnect 5524P, PowerConnect 5548, PowerConnect 5548p, PowerConnect 6224, PowerConnect 6224F, PowerConnect 6224P, PowerConnect 6248, PowerConnect 6248P, PowerConnect 7024, PowerConnect 7024F, PowerConnect 7024P, PowerConnect 7048, PowerConnect 7048P, PowerConnect 7048R, PowerConnect 8024, PowerConnect 8024F, PowerConnect 8100 Series, PowerConnect M6220, PowerConnect M6348, PowerConnect M8024, PowerConnect M8024-K
...
View More
about warranties
View Less
about warranties