Standaardconsole-instellingen van Dell EMC Networking voor switches uit de PowerConnect-serie, X-serie, N-serie, ON-serie, Chassis-serie en S-serie
Summary:Welke baudsnelheid is nodig om verbinding te maken met mijn Dell Switch
Please select a product to check article relevancy
This article applies to This article does not apply toThis article is not tied to any specific product.Not all product versions are identified in this article.
Stel de data format (dataformattering) in op 8 bits, stop bits op 1, en no parity (geen pariteit)
Stel flow control (flowbesturing) in op none (geen)
De S4048-ON Switch heeft verschillende standaardinstellingen voor de Micro-USB-console en de RS-232-console.
Micro-USB: Datasnelheid tot 9600 baud
Stel de data format (dataformattering) in op 8 bits, stop bits op 1, en no parity (geen pariteit)
Stel flow control (flowbesturing) in op none (geen)
RS-232-console:
Datasnelheid tot 115200 baud
Stel de data format (dataformattering) in op 8 bits, stop bits op 1, en no parity (geen pariteit)
Stel flow control (flowbesturing) in op none (geen)
Stel de data format (dataformattering) in op 8 bits, stop bits op 1, en no parity (geen pariteit)
Stel flow control (flowbesturing) in op none (geen)
Opmerking: Selecteer onder Properties (Eigenschappen) VT100 voor de emulatiemodus. Bij veel emulators wordt dit standaard gebruikt en de locatie van deze instelling verschilt per terminalemulator.