Symptoms
在Windows Server 2016中,设置为指明某功能是否启用的标记在重新启动前未设置。 在Dell Storage Manager中,运行Server Setup(服务器设置)向导时,由于未设置标记,将出现以下错误消息。
Cause
。
Resolution
解决办法:
- 首先安装运行Windows Server 2016的MPIO;
- 重新启动服务器;
- 通过以下任一方式验证MPIO是否已安装:
- 运行 PowerShell 命令:
get-windowsfeature multipath-io
“Install State”必须显示为“Installed”。
- 检查Windows控制面板中是否有MPIO
- 使用Dell Storage Manager并运行“Server Setup”(服务器设置)向导。
如果遇到上述错误,请重新启动服务器并重新运行向导。
分辨率:
修复程序位于 2018 年 3 月更新 3B 包 KB 4088787 中(这是一个累积包)。
要检查已安装的更新,请使用 PowerShell 命令:
Get-HotFix |ft HotfixID, InstalledOn
Affected Products
Compellent (SC, SCv & FS Series), Dell Compellent SC4020, Dell Storage SC8000, Dell Compellent Series 40, Dell Storage SCv2000, Dell Storage SCv2020, Dell Storage SCv2080, Dell Storage SC5020, Dell Storage SC5020F, Dell Storage SC7020
, Dell Storage SC7020F, Dell Storage SC9000, Dell Storage SCv3000, Dell Storage SCv3020
...