Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Article Number: 000128606

Latitude 7410 Teardown, removal guide for customer replaceable units (CRUs)

Summary: This article is a guide to safe removal and replacement of those parts of a Latitude 7410 and 7410 2-in-1 notebook that Dell considers safe and easy for anyone to attempt.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content

Symptoms

These guides take you step-by-step through the safe removal of the Customer Replaceable Unit (CRU) parts of a Latitude 7410 Notebook and 2-in-1 system. (CRUs are the parts of the system that should not need an engineer to remove or replace.) The guides include pictures to reference what is involved.

Table of Contents:

  1. CRU Removal Guide
  2. Removal Instructions

 

Removal Guide

 

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

The article below provides information about safe practices to take into consideration before working with electrical equipment.


Back to Top

Cause

N/A

Resolution

 

Removal Instructions

 

SLN321560_en_US__1icon Note: Click the title of the section you want to open below, in order to see the contents.
 
|

 

SLN321560_en_US__2ReqTools_E7450_BKeith_01

1 Small Phillip's head screwdriver 2 Plastic Scribe
3 Small Flat head screwdriver    
 
SLN321560_en_US__1icon Note: Be aware that using a large Phillips or Flat Head screwdriver may result in damage to the head of the screws. This would make their removal impossible without specialty tools, that are not available to our onsite engineers.

 

  1. Pre-Removal Instructions before removing the Access Panel:

    1. During installation or removals of any hardware always ensure that all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

  2. Turn the system over on its closed lid and loosen the eight (8) captive screws securing the access panel to the chassis

SLN321560_en_US__4CRU_7410_Door_01_BK

  1. Using a plastic scribe or some other tool that will not mark the plastics, pry the cover up from the top left-hand side corner and work clockwise around the access panel to release it from the chassis

SLN321560_en_US__5CRU_7410_Door_02_BK

  1. Lift the panel up and away from the chassis

SLN321560_en_US__6icon Caution: Do Not slide the scribe through the edge along the top side of the panel as it can damage the latches inside the Access Panel

 

  1. Pre-Removal Instructions before removing the Solid State Drive (SSD):

    1. During installation or removals of any hardware always ensure that all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the Access Panel and disconnect the battery cable

  2. With the system on its closed lid, the SSD is located in the upper, center of the system.

  3. Remove the single screw that secures the thermal plate and remove the thermal plate from on top of the SSD

SLN321560_en_US__7CRU_7310_SSD_01_BK

2230 SSD

  1. Remove the single screw that secures the SSD to the chassis and lift it out of the M.2 connector and system

SLN321560_en_US__8CRU_7310_SSD_02_BK

2280 SSD

  1. Remove the single screw that secures the SSD to the chassis and lift it out of the M.2 connector and system

SLN321560_en_US__9CRU_7310_SSD_03_BK

 

  1. Pre-Removal Instructions before removing the MicroSD Memory Card:

    1. During installation or removals of any hardware always ensure that all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

  2. The Micro SD slot is located on the left-hand edge of the system. Push in gently on the card in the slot and release to have it pop out of the slot

SLN321560_en_US__10CRU_7310_MSD_BK

  1. Grip the card and pull it the rest of the way out of the slot

 

  1. Pre-Removal Instructions before removing the SIM Card:

    1. During installation or removals of any hardware always ensure that all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

  2. The SIM slot is located on the right-hand edge of the system. Push a SIM card tool or a straightened paper clip gently into the hole on the left-hand side of the SIM card slot filler until it pops out of the slot

SLN321560_en_US__11CRU_7410_SIM_BK

  1. Remove the filler and fit the SIM card and push the filler back into the system until it locks in place

 

  1. Pre-Removal Instructions before removing the WWAN Card (Cellular):

    1. During installation or removals of any hardware always ensure that all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the Access Panel and disconnect the battery cable

  2. With the system on its closed lid, the WWAN card is located in the top left-hand corner of the system. Remove the single (1) screw that secures the WWAN shielding cover to the chassis

SLN321560_en_US__12CRU_7310_WWAN_01_BK

  1. Using a plastic scribe, pry the shielding cover from on top of the antenna cables and the card will pop up at an angle from the motherboard

  2. Disconnect the antenna cables pop connectors from the press studs on the WWAN card

SLN321560_en_US__13CRU_7310_WWAN_02_BK

  1. Pull the card out of the connector on the motherboard and away from the system

 

  1. Pre-Removal Instructions before disconnecting the WLAN Antennae (WiFi, Wireless):

    1. During installation or removals of any hardware always ensure that all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

    4. Please remove the Access Panel and disconnect the battery cable

  2. With the system on its closed lid, the WLAN module is located between the system fan and the SSD in the center of the system. Remove the single (1) screw that secures the WLAN antennae bracket to the chassis

SLN321560_en_US__14CRU_7310_WLAN_01_BK

  1. Remove the bracket from on top of the antenna cables and disconnect the antenna cables pop connectors from the press studs on the WLAN module

 

If you require further assistance, please contact Technical Support.

 

  Contact Us  

Article Properties

Affected Product

Latitude 7410

Last Published Date

24 May 2024

Version

5

Article Type

Solution

Back to Top