Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us
Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

WD19 Series Dock Firmware Update Fails on Computers with Windows 10 19H1 or Higher

Summary: This article provides information about the WD19 series dock firmware update failing on systems with Windows 10 19H1 or higher.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

WD19 Series Docking Station Firmware Update Failure

An error may occur while updating WD19 Series dock firmware. "Error: Unable to reboot WD19. Power cycle the dock to complete the update." A red X is displayed next to the EC firmware portion of the update. (Figure 1.) This error may occur updating the firmware on any WD19 or WD19S series dock.

WD19x updated fails

Figure 1. - WD19 Dock Firmware Update Failure

 

Cause

These computers use legacy thunderbolt driver, and BIOS assist thunderbolt firmware. However, later versions of Windows 10 (19H1 or higher) do not support the legacy driver. These versions of Windows 10 require native thunderbolt firmware.

Resolution

Note: The power button on the dock does not power cycle the WD19. The power button emulates the computer power button.

To resolve the firmware update error, complete these troubleshooting steps:

  1. Click Exit in the firmware update utility.
  2. Disconnect the WD19 USB Type-C connector from the computer.
  3. Unplug the AC adapter from the WD19 dock.
  4. Wait 30 seconds.
  5. Reconnect the AC adapter connection to the WD19 dock. (The power button LED should flash three times then go off.)
  6. Reconnect the dock USB Type-C cable connection to the computer.
  7. Rerun the WD19 dock firmware update.
  8. The firmware update now completes without errors.

Additional Information

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

Affected Products

Dell Dock WD19, Dell Performance Dock - WD19DC, Dell Performance Dock – WD19DCS, Dell Dock – WD19S, Dell Thunderbolt Dock - WD19TB, Dell Thunderbolt Dock – WD19TBS, Latitude 7280, Latitude 7380, Latitude 7480, Latitude 5580, Precision 7520 , Precision 7720, Latitude 5280 mobile thin client ...
Article Properties
Article Number: 000184585
Article Type: Solution
Last Modified: 24 Sept 2024
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.