Op poort gebaseerde VoIP QoS installeren op Dell Networking Force10 switches
Summary:Hoe kan ik QoS instellen op Dell Networking Force10 switches, hoe kan ik VOIP-instellingen configureren op de Dell Force10-switch
Please select a product to check article relevancy
This article applies to This article does not apply toThis article is not tied to any specific product.Not all product versions are identified in this article.
In dit artikel wordt beschreven hoe u op poort gebaseerde VoIP QoS instelt op Dell Networking Force10 switches
Voorbeeld van een VOIP-configuratiepoort op basis van QoS
Hier verzendt de VoIP-telefoonverkeer met DSCP-waarde 46. De Dell Networking Force10 switch wordt geconfigureerd om de DSCP-waarde voor het binnendringen van verkeer te vertrouwen en de prioriteit te bepalen voor de hardware-wachtrij die dit verkeer onderhoudt.
Ga als volgt te werk:
1. Configureer een invoer beleids kaart om de DSCP-waarden van het binnendringen te vertrouwen. 2. Voeg de invoer beleids kaart en de interface toe. 3. Configureer de hardware Queue die is toegewezen aan de DSCP-waarde 46 om strikte prioriteit te gebruiken.
De kaart wordt standaard DSCP value 46 ingesteld op hardware Queue 2.
Command
Parameters
Force10 # conf
Voer de configuratiemodus in.
Force10 (conf) # Policy-map-input my-trust-DSCP
Een invoer beleids kaart maken. Deze regel gebruikt 'My-Trust-DSCP' als voorbeeld naam.
Force10 (conf-Policy-map-in) # Trust DiffServ
DSCP-waarden vertrouwen.
Force10 (conf-Policy-map-in) # interface te 0/0
Ga naar de interface configuratiemodus. U kunt hier een bereik opdracht gebruiken.