Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell EMC Networking OS9 How to set up Port Based VoIP QoS

Summary: How to set up QoS on Dell Networking Force10 switches, How to configure VOIP settings on Dell Force10 switch

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

 
This article discusses how to set up Port Based VoIP QoS on Dell EMC Networking Force10 Switches running OS9

 

 

 
The Following platforms do not support this command as it was deprecated in earlier versions of OS9
1.    Z9100
2.    S6100
3.    S5048"

 

QoS Configuration Port Based VOIP Example

 
 
 
Here the VoIP phone sends traffic with DSCP value 46.  The Dell Networking Force10 switch will be configured to trust the ingress traffic DSCP value and set priority to the hardware queue servicing this traffic.
 
Follow these steps:
 

1.  Configure an input policy map to trust ingress DSCP values.
2.  Attach the input policy map to and interface.
3.  Configure the hardware queue mapped to DSCP value 46 to use strict priority.
 
  • By default, the map is set DSCP value 46 to hardware queue 2.

     
 
Command Parameters
Force10# conf Enter configuration mode.
Force10(conf)# policy-map-input my-trust-dscp Create an input policy map.  This line is using "my-trust-dscp" as the example name.
Force10(conf-policy-map-in)# trust diffserv Trust DSCP values.
Force10(conf-policy-map-in)# interface te 0/0 Enter interface configuration mode.  You can use a range command here.
Force10(conf-if-te-0/0)# service-policy input my-trust-dscp
Force10(conf-if-te-0/0)# exit
Attach the policy map to the interface as an input policy.
Force10(conf)# strict-priority unicast 2 Specify a hardware queue to use strict priority scheduling
 


Dell Networking Force10 devices use the following default mappings for DSCP values to particular hardware queues:


 
 
    
DSCP Value S,C,Z-series Queue E-series Queue
0-15 0 0-1
16-31 1 2-3
32-47 2 4-5
48-63 3 6-7


 
 

Verify Configuration 

 
 
 Force10# show qos policy-map summary
 
   Interface            policy-map-input                       policy-map-output
   Te 0/0                 my-trust-dscp                                   
-

Force10# show qos policy-map detail te 0/0
 
   Interface TenGigabitEthernet 0/0

   Policy-map-input   my-trust-dscp
   Trust diffserv
   Queue#                Class-map-name                    QoS-policy-name

Affected Products

Force10 S25-01-GE-24P, Force10 S25-01-GE-24T, Force10 S25-01-GE-24V, Force10 S50-01-GE-48T-V, Force10 S50-01-GE-48T, PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S5000, Force10 S50P, Force10 S55T , Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, Force10 Z9000, Dell Networking Z9500, Dell Networking S3100 Series, PowerSwitch Z9100-ON ...
Article Properties
Article Number: 000110390
Article Type: How To
Last Modified: 21 Feb 2021
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.