I have an Inspiron 7506 2-in-1 that is less than a year old. For over a month now I've been experiencing delays in audio and video loading. For example, YouTube videos will buffer for about 20 seconds before starting or will simply display an error message ("If playback doesn't begin shortly, try re

Welcome to the Dell Community. * From your Service Tag page, click DRIVERS & DOWNLOADS* Select the Serial ATA drop down category* Look for the latest Intel Rapid Storage Technology Driver (version 15.5.2.1054 or newer)* Download/install. When done, r

Welcome to the Dell Community  @Ebin2310  Go to the “Control Panel” Click on “Default Programs” In the lower left hand corner click on “Programs and Features” You could try to "Repair" first, if not then “Uninstall” any "Intel Optane Softwa

Greetings: I have come into the ownership of a Dell/EMC AX100i system.  It has an issue where SP A will not boot but SP B does.  I know it's software related because I have a second SP chassis and the problem remains with the drives and does not follow the chassis.   After multi

Dear colleagues,We start setup procedure on brand new Dell AX4-5 DualSP fiber storage. It is connected to 2x Linux servers. We following the instructions and run naviinittool. We set storage name, ip address and we created admin user on both storage processors . After reboot we tried to access Navis

Been landed with a project started by an ex colleague. I need to uninitialize or reset to default an AX4-5 so that I can start again. I have run the Navishpere Storage system initialization wizard but it does not find the device. I know that the connections are all OK as I can see another initialize

Good afternoon everyone - Configuration Details:   We recently purchased a md3000i and have been having serious issues getting the device on the network and even pingable from one of the managment interfaces.  Our configuration is simple and as follows:   Frame 0  Mgmt I

I am looking for a document, FAQ or link to explain where and how to configure the AX100 to communicate with the UPS and do a graceful shutdown in the event of a power failure. Thanks in advance!   Clay

Hi, all Our server is PE 2950, the operation system is Windows Server 2008 Enterprise Edition, the disk array is AX150i. When I install the PowerPath at this server I see the following steps: 1. It let me select "Do you have only AX series CLARiiON arrays connected to this host?", we have the AX15