Cannot see the devices connected to the HP fibre channel.
Host: HP OS: HP-UX 10.20
Application SW: LVM (Logical Volume Manager)
Hardware: Fibre channel
Use the fcmsutil to reset the fibre channel interface.
* tip * list /dev/fcms* Then compare the instance number(#) of the lan class from ' ioscan -kfn' for correspondence to the fcms#. This is how you can determine the hardware path and the instance# or channel# for the ext_bus.
For a usage example: fcmsutil /dev/fcms1 reset
see man pages - 'man fcmsutil' - for complete usage of utility.
This utility applies to the A3591A, A3404A, A3636A fibre channel HBA's employed on the HP 9000 platform. The host is probably missing HP patch PHSS_18326. Check for it's installation using 'swlist'. If this patch is missing it should be installed to avoid this problem in the future.
It is also advisible to stop all I/O on the interface before a reset.
See also Solution [Link Error:UrlName "6-0-6351465-2178072-Debugging-Fibre-issues-on-HP" not found]
cxemc
2 Intern
2 Intern
•
362 消息
0
2013年9月23日 01:00
确认配置好的话,还不行的话按照下面的方法试试看。
OS: HP-UX 10.20
Application SW: LVM (Logical Volume Manager)
Hardware: Fibre channel
* tip *
list /dev/fcms*
Then compare the instance number(#) of the lan class from ' ioscan -kfn' for correspondence to the fcms#.
This is how you can determine the hardware path and the instance# or channel# for the ext_bus.
For a usage example: fcmsutil /dev/fcms1 reset
see man pages - 'man fcmsutil' - for complete usage of utility.
This utility applies to the A3591A, A3404A, A3636A fibre channel HBA's employed on the HP 9000 platform.
The host is probably missing HP patch PHSS_18326.
Check for it's installation using 'swlist'.
If this patch is missing it should be installed to avoid this problem in the future.
It is also advisible to stop all I/O on the interface before a reset.
See also Solution [Link Error:UrlName "6-0-6351465-2178072-Debugging-Fibre-issues-on-HP" not found]
liulei_it
2 Intern
2 Intern
•
3.2K 消息
0
2013年9月23日 00:00
您的线连接好了么,在存储上把LUN映射给主机了么?SAN SWITCH配置了么?
Fenglin1
2 Intern
2 Intern
•
2.1K 消息
0
2013年9月23日 02:00
楼主是不是有运行过扫盘的命令?然后再/dev/dsk/下面看不到cxtxdx的设备吗?还有是不是存储和交换机端都配置完成了?最好提供更多的信息,方便大家帮你参谋参谋。
shengqiu_Cui
1 Rookie
1 Rookie
•
66 消息
0
2013年9月23日 07:00
估计是测试环境吧。
iamgoust
42 消息
0
2013年9月23日 08:00
如何不能识别?是不是交换机的问题呢
AndrewX1
30 消息
1
2013年9月23日 19:00
如果是HP-UX,试一下修改Initiator Type (e.g HP Auto Trespass)。
yifan
30 消息
0
2013年9月23日 20:00
hp的主机用得越来越少了。很多都换aix了。
liulei_it
2 Intern
2 Intern
•
3.2K 消息
0
2013年9月23日 20:00
最近刚把主力机换成至强的啦
zhuzhu281306
631 消息
0
2013年9月23日 22:00
楼主给的信息太少了,最起码把环境阐述清楚了。
要看看提问的艺术帖子。
bigbug1
196 消息
0
2013年9月24日 00:00
HBA有没有enabled.
enabled以后扫描一下,能不能看到。
LUN有没有弄到128以后了
光线有没有光信号
有光信号的话,Zoning是不是正确
等等
Wyman_chen
38 消息
0
2013年9月24日 07:00
问题太简单,无从回答。。。