Unsolved
This post is more than 5 years old
1 Message
0
22353
Wyse P25 - VMWare View Display Issues
Wyse P25 - VMWare View Display Issues
Hey there! I'm hoping someone else has come across this issue before and can point me in the right direction.
We've recently purchased a number of Wyse P25 zero clients. These have both a Display Port and DVI connection on the back. When I plug the zero client in with just DVI everything works fine up until the point where you connect to your pool. At that point the screen goes black for about 30 seconds and then kicks them back to the Wyse login screen.
I can have them log into a P20 or a View client at a different workstation and it works different.
If I have a display port adapter plugged in as a primary monitor and DVI plugged in as a secondary then it works fine.
Has anyone sseen this before or have an idea and where I should start looking?
Thanks!
scarp74
1 Message
0
May 27th, 2015 10:00
I believe I'm having the same issue. The only way I've been able to get to the desktop is to make resolution of the golden image the same as should display on the screen. Mine is currently 1280x1024. If I set that on the GM, the p25 loads my desktop fine. If I go with a minimal 800x600 for it to autoresize, then it just goes black. I'm interested in knowing if you have been able to resolve your issue in a different way.
Thanks