Unsolved
This post is more than 5 years old
3 Posts
0
7540
Pink screen after Xenith Firmware 1.7 upgrade
Pink screen after Xenith Firmware 1.7 upgrade
After upgrading firmware from 1.6 to 1.7, the secondary screen is pink (see attached picture). The Xenith is setup with a split with a DVI cable to primary monitor and VGA to secondary monitor. It strangley doesn occur after the first reboot but after the second.
I've stripped out the xen.ini to almost nothing and seen it occur on 10+ devices so it appears to be firmware related but maybe an ini setting will resolve it. I've played with the refresh rates and resolutions as well.
Any ideas?
Hellerfl
3 Posts
0
May 12th, 2015 04:00
Hello yetimax,
i had the same problem with Version 1.7 an build 33 or 34.
Now we use Version 1.7 with build 37 and it works fine.
yetimax
3 Posts
0
May 12th, 2015 04:00
For those, that may run into this screen corruption issue. Just add this to your ini prior to updating the firmware.
AutoSignoff=yes Shutdown=yes
ShutDown=turnoff
It appears to prevent the video driver from getting corrupt on shutdown.
Eric Pearson-20
2 Posts
0
June 1st, 2015 05:00
I don't have access to the latest firmware and having connetions issue, could you post the fixes included in V1.7_037 please.
Thanks