Unsolved
1 Rookie
•
6 Posts
0
101
VNX 5300 - Can not delete Pool (state:Deleting)
I have created 3 test pools and then changed some disk slot and try to deleted failed pools. but can not. it change the pool state to deleting and no changes after an hour. I reboot SP but no changes! I also disconnect all DAE but ...
in pool status details I have this error:
An error occurred while accessing the Storage Pool. Please resolve any hardware problems and retry the operation. (0x712D8514)
Any way to clean this pools?!
I have no data on my VNX 5300! and no emc support!
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
March 15th, 2024 17:12
Hi,
Thanks for your question.
Can you put the drives back in the original slots and try to delete?
Let us know if you have any additional questions.
MrPine
1 Rookie
1 Rookie
•
6 Posts
0
March 16th, 2024 08:31
@DELL-Josh Cr
I don't know the old disks slot . any way to find?! BTW in my raid6 properties i have no disk .
Here is my pool status:
Pool Name: Pool 2
Pool ID: 2
Raid Type: r_6
Percent Full Threshold: 70
Description:
Disk Type:
State: Destroying
Status: An internal error occurred resulting in a Pool lun going offline. (0x712d8514)
Current Operation: Destroying
Current Operation State: Running
Current Operation Status: OK(0x0)
Current Operation Percent Completed: 0
Raw Capacity (Blocks): 0
Raw Capacity (GBs): 0.000
User Capacity (Blocks): 20165677056
User Capacity (GBs): 9615.744
Consumed Capacity (Blocks): 10506240
Consumed Capacity (GBs): 5.010
Available Capacity (Blocks): 20155170816
Available Capacity (GBs): 9610.734
Percent Full: 0.052
Total Subscribed Capacity (Blocks): 10506240
Total Subscribed Capacity (GBs): 5.010
Percent Subscribed: 0.052
Oversubscribed by (Blocks): 0
Oversubscribed by (GBs): 0.000
Disks:
LUNs:
Pool Name: Pool 1-
Pool ID: 1
Raid Type: r_6
Percent Full Threshold: 70
Description:
Disk Type: Unknown
State: Destroying
Status: An internal error occurred resulting in a Pool lun going offline. (0x712d8514)
Current Operation: Destroying
Current Operation State: Running
Current Operation Status: OK(0x0)
Current Operation Percent Completed: 0
Raw Capacity (Blocks): 0
Raw Capacity (GBs): 0.000
User Capacity (Blocks): 11239575552
User Capacity (GBs): 5359.447
Consumed Capacity (Blocks): 10506240
Consumed Capacity (GBs): 5.010
Available Capacity (Blocks): 11229069312
Available Capacity (GBs): 5354.438
Percent Full: 0.093
Total Subscribed Capacity (Blocks): 10506240
Total Subscribed Capacity (GBs): 5.010
Percent Subscribed: 0.093
Oversubscribed by (Blocks): 0
Oversubscribed by (GBs): 0.000
Disks:
Bus 1 Enclosure 0 Disk 2
Bus 1 Enclosure 0 Disk 4
Bus 1 Enclosure 0 Disk 6
Bus 1 Enclosure 0 Disk 8
Bus 1 Enclosure 0 Disk 11
Bus 1 Enclosure 0 Disk 10
Bus 1 Enclosure 0 Disk 1
Bus 1 Enclosure 0 Disk 3
Bus 1 Enclosure 0 Disk 5
Bus 1 Enclosure 0 Disk 7
Bus 1 Enclosure 0 Disk 9
Bus 1 Enclosure 0 Disk 0
LUNs:
(edited)
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
March 18th, 2024 13:02
Hi,
Thanks for your question.
Try putting these 0-11 rather than out of order.
Bus 1 Enclosure 0 Disk 2
Bus 1 Enclosure 0 Disk 4
Bus 1 Enclosure 0 Disk 6
Bus 1 Enclosure 0 Disk 8
Bus 1 Enclosure 0 Disk 11
Bus 1 Enclosure 0 Disk 10
Bus 1 Enclosure 0 Disk 1
Bus 1 Enclosure 0 Disk 3
Bus 1 Enclosure 0 Disk 5
Bus 1 Enclosure 0 Disk 7
Bus 1 Enclosure 0 Disk 9
Bus 1 Enclosure 0 Disk 0
Let us know if you have any additional questions.
MrPine
1 Rookie
1 Rookie
•
6 Posts
0
March 23rd, 2024 08:27
@DELL-Josh Cr
TNX for your reply. But pool1 slot is not empty.
as you can see in Pool 2, disk member is empty! I created pool1 after going pool2 in deleting state to test delete pool operation but i could not delete poo1.(as i can remember i did not change disk slot in pool1)
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
March 25th, 2024 12:41
Then you are going to need to call phone support, there isn't a user way to recover.
MrPine
1 Rookie
1 Rookie
•
6 Posts
0
April 2nd, 2024 04:43
@DELL-Josh Cr
!! I have no support. Any way to reset all settings to default factory?! or initializing all disk via command or ... I think the problem is that pool2 disk member is empty and it can not delete raid data from missing disk!
I dashboard I have 5 errors like this :
"One or more disk drives are in the wrong slot"
And also this error:
Any command to refresh disk slot and 'wrong slot' error without resetting VNX.
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
April 3rd, 2024 12:38
Did you try putting the disks in the slots it wants you to. There is no way to reset it without calling and paying for support.
MrPine
1 Rookie
1 Rookie
•
6 Posts
0
April 6th, 2024 05:06
@DELL-Josh Cr Yes, But in system\hw\disks I have many different disk status that its not correct. for eg. disk is in slot but disk status is removed! and some disk status is faulted! i think I should reinitialize disk status and do not know how!
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
April 8th, 2024 12:58
There isn't a user way to do this. Only phone support can.
MrPine
1 Rookie
1 Rookie
•
6 Posts
0
April 9th, 2024 07:02
@DELL-Josh Cr
Shameful statement for DEL/EMC Product for such an easy problem!
Praveen.Singh
3 Apprentice
3 Apprentice
•
415 Posts
0
April 24th, 2024 14:07
You have to put the drives back to the original state my friend this is the only way as I can see let me know if you able to trace the slots or just mixed the drives.
tianchou
1 Rookie
1 Rookie
•
68 Posts
0
June 15th, 2024 00:14
from the Remotely anywhere, you can delete a broken pool but very dangerous. the simple way is to reimage it to a factory state.