Unsolved
This post is more than 5 years old
17 Posts
0
2704
ViPR SRM Compliance --> Configuration changes
Good day,
After adding our switches and arrays under ViPR, we noticed repeating messages under Operations --> Compliance --> Configurations changes even if we haven't made any change in our SAN Fabric. Is this something that we need to check on our switches? If yes, where can we validate if those messages are recurring messages
Thank you
fredde1
120 Posts
0
July 19th, 2018 08:00
Hey Zerocoolit:
What breach are you getting?
I would check the switch regarding what the breach is. It sounds like at least VIPR SRM is reporting something, which is a good thing, reporting wise.
You may have to tweak it depending on what is going on.
Thanks
Tim
acmorales
17 Posts
0
July 19th, 2018 19:00
Hi Tim,
Thanks for the reply.
For the breach, nothing is showing up on the report. However, under Configuration changes, I keep getting repeating messages on configuration changes even if we haven't done any. Attached is a sample screenshot of the messages
Thanks,
AJ
fredde1
120 Posts
0
August 2nd, 2018 14:00
Hey Zerocoolit:
If you are sure you are not changing the zoneset somewhere than your best bet would be to open a Service request and someone can look into it.
Thanks
Tim